Related Manuals for Advantech DS-570
Summary of Contents for Advantech DS-570
- Page 1 User Manual DS-570 Graphic-Optimized Digital Signage Player Powered by NVIDIA N14M...
- Page 2 No part of this manual may be reproduced, copied, translated or transmitted in any form or by any means without the prior written permission of Advantech Co., Ltd. Information provided in this manual is intended to be accurate and reliable. How- ever, Advantech Co., Ltd.
- Page 3 Because of Advantech’s high quality-control standards and rigorous testing, most of our customers never need to use our repair service. If an Advantech product is defec- tive, it will be repaired or replaced at no charge during the warranty period. For out- of-warranty repairs, you will be billed according to the cost of replacement materials, service time and freight.
- Page 4 Technical Support and Assistance Visit the Advantech website at http://support.advantech.com where you can find the latest information about the product. Contact your distributor, sales representative, or Advantech's customer service center for technical support if you need additional assistance. Please have the following information ready before you call: –...
-
Page 5: Packing List
Please use the public collection system to return, recycle, or treat them in compliance with the local regulations. Packing List Before installation, please ensure the following items have been shipped: 1 x DS-570 Unit 1 x accessory box including below – 1 x bracket sets for power adapter –... -
Page 6: Safety Instructions
The sound pressure level at the operator's position according to IEC 704-1:1982 is no more than 70 dB (A). DISCLAIMER: This set of instructions is given according to IEC 704-1. Advantech disclaims all responsibility for the accuracy of any statements contained herein. -
Page 7: Table Of Contents
General ..................2 1.2.2 Display ..................2 1.2.3 Power Consumption..............2 Hardware Specifications ................3 Mechanical Specifications................. 4 Figure 1.1 DS-570 Mechanical Dimensions ........ 4 Power Requirements................. 4 Environment Specification................. 4 Chapter Hardware Installation ......5 DS-570 Front and Rear Views ..............6 Figure 2.1 Front view .............. - Page 8 Boot BIOS Feature Setup ............28 Figure 3.12Boot configuration setup screen....... 28 3.2.6 Save & Exit BIOS Feature Setup..........29 Figure 3.13Save & Exit configuration setup screen....29 Chapter Software..........31 Intel TXE driver Installation ..............32 DS-570 User Manual viii...
-
Page 9: Chapter 1 General Introduction
Chapter General Introduction This chapter gives background information of DS-570 series. -
Page 10: Introduction
DS-570 has 4 display output interfaces (2 x HDMI, 1 x DP++ and 1 x VGA) to provide up to 4 display outputs simultaneously. For better connectivity, it has internal support for 2 x Mini PCIe interfaces for add-on functions such as wireless and TV tuner cards to fulfill different requirements. -
Page 11: Hardware Specifications
HDD: Supports 1 x 2.5" SATA HDD SSD: Share with the 2.5" SATA HDD drive bay Watchdog Timer: Supported by Advantech SUSIAccess API I/O Interface: 2 x RS-232 USB: 1 x USB 3.0 and 3 x USB 2.0 compliant ports ... -
Page 12: Mechanical Specifications
Dimensions: 220.0 x 150.0 x 44.2 mm (8.67" x 5.91" x 1.74") (L x W x H) 247.40 [9.740] 235.40 [9.268] 220 [8.661] Figure 1.1 DS-570 Mechanical Dimensions Weight: 1.7 kg (3.75 lb) Power Requirements System Power: –... -
Page 13: Chapter 2 Hardware Installation
Chapter Hardware Installation This chapter introduces DS-570 external I/O and the Hardware installation. -
Page 14: Ds-570 Front And Rear Views
DS-570 Front External I/O Connectors 2.2.1 Power ON/OFF Button DS-570 has a power ON/OFF button on front side. Push this button to turn the sys- tem ON and OFF. It can also support 4 second delay soft power off. Figure 2.3 Power button 2.2.2... -
Page 15: Ethernet Connector (Lan)
2.2.3 Ethernet Connector (LAN) DS-570 provides two RJ45 LAN interface connectors (1 x LAN in front-side; 1 x LAN in rear-side), they are fully compliant with IEEE 802.3u 10/100/1000 Base-T CSMA/ CD standards. The Ethernet port provides a standard RJ-45 jack connector with LED indicators on the front side to show its Active/Link status and speed status. -
Page 16: Com Connector
The S/PDIF port allows you to transfer digital sound to an amplifier or television. It supports jack-sensing and can be the Line out function. Figure 2.8 S/PDIF connector DS-570 Rear External I/O Connectors 2.3.1 Power Input Connector DS-570 comes with a DC-Jack header that takes 19 VDC external power input. DS-570 User Manual... -
Page 17: Power Input Connector
Figure 2.9 DC input connector 2.3.2 VGA Connector DS-570 provides one high resolution VGA interface connected by a D-sub 15-pin connector to support VGA(CRT) compatible monitors. It supports display resolutions of up to 2048 x 1536 @ 60 Hz. Figure 2.10 VGA Connector Table 2.4: VGA Connector Pin Assignments... - Page 18 Figure 2.11 HDMI connector Table 2.5: HDMI Connector Pin Assignments Signal Name TMDS Data2+ TMDS Data2– TMDS Data1+ TMDS Data1– TMDS Data0+ TMDS Data0– TMDS Clock+ TMDS Clock– +5 V Power Detect DS-570 User Manual...
-
Page 19: Dp++ Connector
2.3.4 DP++ Connector DS-570 DP++ connector not only supports DP output but also can direct output sin- gle-link HDMI and DVI signals using a simple passive adapter. It can support a maxi- mum resolution of 3840 x 2160p but the actual resolutions supported depend on the monitor being used. -
Page 20: Usb Connectors
2.3.5 USB Connectors DS-570 rear side has 2 x USB interface connectors (1 x USB 2.0 and 1 x USB 3.0), which give complete Plug & Play and hot swapping capability for up to 127 external devices. The three USB 2.0 interface are compliant with USB UHCI, Rev. 2.0. and the USB 3.0 is compliant with USB UHCI, Rev. -
Page 21: Hardware Installation
Remove the heatsink by loosening the 4 fixing screws on front and rear panels, and 2 fixing screws inside the chassis Insert the memory module into memory sockets Reverse the above-mentioned steps to assemble the system Figure 2.14 Memory module installation DS-570 User Manual... -
Page 22: Hdd Installation
2.4.2 HDD Installation Assemble the 2.5-inch SATA HDD on HDD bracket with 4 HDD screws. Install the HDD module into the system. Assemble the HDD cover back with 2 screws. Figure 2.15 HDD installation DS-570 User Manual... -
Page 23: Mini Card & Sim Card Installation
Assemble back the Mini PCIe cover with the screws. Note! Mini PCIe1 supports mSATA and mini PCIE cards. Note! The SIM Card slot is under the Mini PCIE2 slot. Figure 2.16 Mini PCIe and SIM card installation DS-570 User Manual... - Page 24 I/O panels, and 2 fixing screws inside the chassis; and then remove the front panel 4 screws to take off the front cover. Fix the antenna onto the front IO panel. Re-assemble the system. Figure 2.17 Installation of Antenna for Wireless LAN DS-570 User Manual...
-
Page 25: Bios Settings
Chapter BIOS Settings This chapter introduces how to set BIOS configuration data. -
Page 26: Bios Introduction
BIOS Introduction With the AMI BIOS Setup program, you can modify BIOS settings and control various system features. This chapter describes the basic navigation of the DS-570 series BIOS setup screens. AMI BIOS’s ROM has a built-in setup program that allows users to modify the basic system configuration. -
Page 27: Advanced Bios Features Setup
3.2.2 Advanced BIOS Features Setup Select the Advanced tab from the DS-570 setup screen to enter the Advanced BIOS setup screen. You can select any of the items in the left frame of the screen, such as CPU configuration, to go to the sub menu for that item. You can display an Advanced BIOS Setup option by highlighting it using the <Arrow>... -
Page 28: Figure 3.3 Acpi Setup Screen
ISCT sleep duration is only in seconds format, actual time format is not sup- ported – ISCT RF Kill Switch Type Software/Hardware ISCR RF Kill Switch Type – ISCT RTC Timer Support Enable/Disable ISCT RTC Timer ITE8528E Super IO Configuration System Super IO chip parameters DS-570 User Manual... -
Page 29: Figure 3.4 Hw Monitor Screen
ITE8528E HW Monitor Monitor hardware status (PC health status) Figure 3.4 HW Monitor Screen S5 RTC Wake Settings Enable system to wake from S5 using RTC alarm Figure 3.5 S5 RTC Wake setup screen DS-570 User Manual... -
Page 30: Figure 3.6 Cpu Configuration Setup Screen
Serial Port Console Redirection Serial Port Console Redirection CPU Configuration CPU Configuration parameters Figure 3.6 CPU Configuration setup screen PPM Configuration Enable/Disable CPU C state report to OS DS-570 User Manual... -
Page 31: Figure 3.7 Ide Configuration Setup Screen
– High Precision Timer Enable/Disable the high precision event timer – PCI Express Dynamic Clock Gating Enable/Disable PCIE dynamic clock gating – OS Selection OS Selection. The OS selection should be set and matched what OS applied. DS-570 User Manual... -
Page 32: Figure 3.8 Miscellaneous Configuration Setup Screen
5 sec, 10 sec, 20 sec – Device reset time-out USB mass storage device Start Unit Command time-out. The choice: 10 sec, 20 sec, 30 sec, 40 sec – Device power-up delay Auto/Manual, USB mass storage device Start Unit Command time-out. DS-570 User Manual... -
Page 33: Figure 3.9 Usb Configuration Setup Screen
Figure 3.9 USB Configuration setup screen Security Configuration Intel® Anti-Theft Technology configuration Figure 3.10 Intel® TXE Configuration setup screen DS-570 User Manual... -
Page 34: Chipset Bios Feature Setup
3.2.3 Chipset BIOS Feature Setup Select the Chipset tab from the DS-570 setup screen to enter the Chipset BIOS setup screen. Users can select any item in the left frame of the screen. North Bridge North Bridge Parameters –... -
Page 35: Security Bios Feature Setup
Security BIOS Feature Setup Select the security tab from the setup screen to enter the security BIOS setup screen. Figure 3.11 Security configuration setup screen Administrator Password Set Administrator Password. User Password Set User Password. DS-570 User Manual... -
Page 36: Boot Bios Feature Setup
3.2.5 Boot BIOS Feature Setup Select the Boot tab from the DS-570 setup screen to enter the Boot BIOS setup screen. Users can select any item in the left frame of the screen. Figure 3.12 Boot configuration setup screen ... -
Page 37: Save & Exit Bios Feature Setup
Save the changes done so far as User Defaults. Restore User Defaults Restore the User Defaults to all the setup options. Boot Override – UEFI Built-in EFI Shell – Launch EFI Shell from file system device DS-570 User Manual... - Page 38 Attempts to Launch EFI Shell application (Shell.efi) from one of the available file system devices. – Reset System with ME disable ModeMEUD000 ME will runs into the temporary disable mode, ignore if ME ignition FWMED001 DS-570 User Manual...
-
Page 39: Software
Chapter Software This chapter highlights the OS installation prompt. -
Page 40: Intel Txe Driver Installation
The VCN value has increased to ¯8ˇ. As a result, Full FW upgrade from Intel(R) TXE FW 1.1.0.1089 is possible however a down- grade from Intel(R) TXE FW 1.1.0.1113 to an earlier kit is not possi- ble. DS-570 User Manual... - Page 41 DS-570 User Manual...
- Page 42 No part of this publication may be reproduced in any form or by any means, electronic, photocopying, recording or otherwise, without prior written permis- sion of the publisher. All brand and product names are trademarks or registered trademarks of their respective companies. © Advantech Co., Ltd. 2014...