Pnp/Pci Configurations - Advantech DSA-3400 User Manual

4.7.13 PCI PIRQ [A-D]#
When Enabled, the system will resume from suspend mode if interrupt occurs. The choice:
Enabled, Disabled.

4.8 PnP/PCI Configurations

4.8.1 PnP OS Installed
Select "Yes" if you are using a plug and play capable operating system.
Select No if you need the BIOS to configure non-boot device
Figure 4.7: PnP/PCI configurations screen
4.8.2 Reset Configuration Data
Default is Disable. Select Enable to reset Extended System Configuration Data (ESCD) if you
have installed a new add-on and system configuration has caused such a conflict that OS
cannot boot.
4.8.3 Resources controlled by:
The commands here are "Auto" or "Manual." Choosing "manual" requires you to choose
resources from each following sub-menu. "Auto" automatically configures all of the boot and
Plug and Play devices but you must be using Windows 95 or above.
- 50 -