Advantech DSA-3400 User Manual page 46

Figure 4.7: Onboard Device
4.6.9 Onboard LAN Control
Option is Enable and Disable. Select Disable if user does not want to use onboard LAN
controller
4.6.10 Onboard FDC Controller
When enabled, this field allows you to connect your floppy disk drives to the onboard floppy
disk drive connector instead of a separate controller card. If you want to use a different
controller card to connect the floppy disk drives, set this field to Disabled.
4.6.11 Onboard Serial Port
For settings reference the Appendix for the serial resource allocation, and Disabled for the on-
board serial connector.
4.6.12 UART Mode Select
This item allows you to select UART mode. The choices: IrDA, ASKIR, Normal.
4.6.13 RxD, TxD Active
This item allows you to determine the active of RxD, TxD. The Choices: "Hi, Hi," "Lo, Lo," "Lo,
Hi," "Hi, Lo."
4.6.14 IR Transmission Delay
This item allows you to enable/disable IR transmission delay. The choices: Enabled, Disabled.