Advantech DS-980 User Manual
  1. Manuals
  2. Brands
  3. Advantech Manuals
  4. Digital Signage
  5. DS-980
  6. User manual
Advantech DS-980 User Manual

Advantech DS-980 User Manual

Video wall signage player by expandable pci express x16
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
User Manual
DS-980/DS-980GL
Video Wall Signage Player by
Expandable PCI Express x16

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DS-980 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Advantech DS-980

Summary of Contents for Advantech DS-980

  • Page 1 User Manual DS-980/DS-980GL Video Wall Signage Player by Expandable PCI Express x16...
  • Page 2 No part of this manual may be reproduced, copied, translated or transmitted in any form or by any means without the prior written permission of Advantech Co., Ltd. Information provided in this manual is intended to be accurate and reliable. How- ever, Advantech Co., Ltd.
  • Page 3 Because of Advantech’s high quality-control standards and rigorous testing, most of our customers never need to use our repair service. If an Advantech product is defec- tive, it will be repaired or replaced at no charge during the warranty period. For out- of-warranty repairs, you will be billed according to the cost of replacement materials, service time and freight.

  • Page 4: Packing List

    Discard used batteries according to the manufacturer's instructions. Packing List Before installation, please ensure the following items have been shipped:  1 x DS-980/DS-980GL system  1 x 12V DC-in 150W power adaptor  1 x accessory box containing the items listed below –...
  • Page 5 WIFI & 3G module by mini-PCIe interface Part Number Description AMO-WIFI06E Realtek/wifi 802.11bgn/ mini PCIe, cable, antenna AMO-WIFI07E DHXA/wifi802.11abgn+BT4.0/miniPCIe,cable,antenna AMO-HSDPA02E U-blox/HSDPA 6band/miniPCIe,cable,antenna WIFI module by M.2 E key interface Part Number Description EWM-W160M201E 802.11 b/g/n,RTL8188EE,1T1R,2-antenna,M.2 2230 1750007965-01 M.2 cable, 30cm 1750000318 M.2 antenna DS-980/DS-980GL User Manual...

  • Page 6: Safety Instructions

    The sound pressure level at the operator's position according to IEC 704-1:1982 is no more than 70 dB (A). DISCLAIMER: This set of instructions is given according to IEC 704-1. Advantech disclaims all responsibility for the accuracy of any statements contained herein.

  • Page 7: Table Of Contents

    1.2.3 Power Consumption..............2 Hardware Specifications ................3 Mechanical Specifications................. 4 1.4.1 Dimensions ................... 4 Figure 1.1 DS-980 (Expansion) mechanical dimensions..... 4 Figure 1.2 DS-980GL (Light) mechanical dimensions ....5 1.4.2 Weight................... 5 Power Requirements................. 5 1.5.1 System Power................5 1.5.2...
  • Page 8 Figure 4.18Intel TXT information ..........48 Figure 4.19SATA configuration ..........49 Figure 4.20Network Stack Configuration – Disabled....50 Figure 4.21Network Stack – enable ........... 50 Figure 4.22CSM Configuration ........... 51 Figure 4.23USB configuration ............ 52 4.2.3 Chipset..................53 DS-980 User Manual viii...
  • Page 9 Figure 4.32Mini PCI Express/ M.2 (2)......... 60 Figure 4.33USB configuration............. 60 Figure 4.34HD Audio Configuration..........61 4.2.5 Security ..................62 Figure 4.35Security..............62 4.2.6 Boot..................... 63 Figure 4.36Boot ................63 4.2.7 Save & Exit ................. 64 Figure 4.37Save & Exit ............... 64 DS-980 User Manual...
  • Page 10 DS-980 User Manual...

  • Page 11: Chapter 1 General Introduction

    Chapter General Introduction This chapter gives background information of DS-980/DS-980GL series.

  • Page 12: Introduction

    Introduction DS-980/DS-980GL is a video wall solution of digital signage players, which is pow- ered by the 6th generation Intel® Core i7/ i5/ i3/ Celeron rPGA processor (LGA 1151), and stackable design for PCI Express 3.0 x16 expansion. DS-980/DS-980GL delivers the exceptional graphic performance by Intel HD Graph- ics 530 which supports HEVC/265, AVC/264, MPEG2, VC1/WMV9, VP8, JPEG/ MJPEG, VP9 video format.

  • Page 13: Hardware Specifications

    – 2nd layer: 1 x 2.5" SATAIII SSD (option) – Option: mSATA by full-size mini-PCIe interface  Watchdog Timer: 1-255 seconds, supported by Advantech SUSI4.0 API  I/O Interface: – 3 x HDMI 1 x HDMI2.0 (printed by HDMI1), 2 x HDMI1.4 (printed by HDMI2 & HDMI 3;...

  • Page 14: Mechanical Specifications

    Expansion configuration (with PCI express x16 slot): 250 (W) x 190 (D) x 88 (H) mm 250 [9.84] 100 [3.94] 53 [2.09] 86 [3.39] 91 [3.58] 35 [1.38] 88 [3.46] 43 [1.69] 50 [1.97] 125.10 [4.93] Figure 1.1 DS-980 (Expansion) mechanical dimensions DS-980/DS-980GL User Manual...

  • Page 15: Weight

    Minimum power input: 12V DC-in 12.5A (for main layer) – Minimum power input: 12V DC-in 7A (optional for bottom layer)  Light configuration (without PCI express x16 slot) – Minimum power input: 12V DC-in 12.5A 1.5.2 RTC Battery 3V/ 220mA T BBBCR2032B DS-980/DS-980GL User Manual...

  • Page 16: Environment Specification

    -Non-operating mode: 2G, IEC60068-2-6, sine, 5 ~ 500Hz, 1 Octave/ min, 1 hr/ axis.  Shock During Operation: 10 G, IEC 60068-2-27, half sine wave, 11 ms dura- tion  Certification: – Safety: UL, CB, BSMI, CCC – EMC: CE, FCC Class B, BSMI, CCC DS-980/DS-980GL User Manual...

  • Page 17: Chapter 2 External I/O Introduction

    Chapter External I/O introduction This chapter introduces DS-980/ DS-980GL series external I/O.

  • Page 18: Ds-980/Ds-980Gl Front And Rear Views

    DS-980/DS-980GL Front and Rear views GLAN1 Mic. in USB1 GLAN2 POWER sw. WiFi LED HDD LED USB2 S/PDIF Figure 2.1 DS-980 (Expansion) front view DC IN HDMI 1 HDMI 2 HDMI 3 USB3.0_1 USB3.0_2 DC IN USB3.0_3 USB3.0_4 Figure 2.2 DS-980 (Expansion) rear view...

  • Page 19: Figure 2.3 Ds-980Gl (Light) Front View

    GLAN1 Mic. in USB1 GLAN2 POWER sw. WiFi LED HDD LED USB2 S/PDIF Figure 2.3 DS-980GL (Light) front view DC IN HDMI 1 HDMI 2 HDMI 3 USB3.0_1 USB3.0_2 USB3.0_3 USB3.0_4 Figure 2.4 DS-980GL (Light) rear view DS-980/DS-980GL User Manual...

  • Page 20: Ds-980/Ds-980Gl Front External I/O Connectors

    DS-980/DS-980GL Front External I/O Connectors 2.2.1 Power ON/OFF Button DS-980/DS-980GL has a power ON/OFF button on front side. Push this button to turn the system ON and OFF. It can also support 4 second delay soft power off. Figure 2.5 Power button 2.2.2...

  • Page 21: Usb2.0 Connector

    The S/PDIF port is default setting and allows you to transfer digital sound to an ampli- fier or television. Also, it supports jack-sense by Line-out functions and you can use either SPDIF or Line-out function by plug option. Figure 2.9 SPDIF/ Line-out connector DS-980/DS-980GL User Manual...

  • Page 22: Ds-980/Ds-980Gl Rear External I/O Connectors

    DS-980/DS-980GL Rear External I/O Connectors 2.3.1 COM Connector DS-980/DS-980GL provides two D-sub 9-pin connectors serial communication inter- face port, and supports 1x RS-232 (default setting) or 2x RS-485 & RS-422 with extension cable. Figure 2.10 COM connector Table 2.3: COM Port Pin Assignments Signal Name 2.3.2...

  • Page 23: Hdmi Connector

    HDMI 1.4 (printed HDMI3) supports its maximum resolution 4K at 30Hz. Figure 2.12 HDMI connector Table 2.5: HDMI Connector Pin Assignments Signal Name TMDS Data2+ TMDS Data2– TMDS Data1+ TMDS Data1– TMDS Data0+ TMDS Data0– TMDS Clock+ TMDS Clock– +5 V Power Detect DS-980/DS-980GL User Manual...

  • Page 24: Power Input Connector

    2.3.4 Power Input Connector DS-980/DS-980GL comes with a DC-Jack header that takes 12V DC-in external power input at main layer, and optional second 12V DC-in at bottom layer. Figure 2.13 DC input connector at main layer Figure 2.14 DC input connector at bottom layer...

  • Page 25: Chapter 3 Hardware Installation

    Chapter Hardware Installation This chapter introduces DS-980/ DS-980GL series Hardware instal- lation.

  • Page 26: Before You Begin

     Transfer the device to a clean, flat, stable work surface over a noncarpeted floor. Caution! Advantech strongly recommends that you look for our global service centers to change any parts which you want in order to ensure our great product quality and make sure the functions well.

  • Page 27: Socket Type Cpu & Thermal Module Installation

    4.3. Connect the thermal cable to the connector printed CPUFAN1 on mother- board. After completed 3 & 4 procedures, please push DS-980/DS-980GL top case (number 3) towards the front side and exactly cover the system. Then, tighten all the screws (number 1 & 2) back on the chassis.

  • Page 28: Ddr4 So-Dimm Memory Installation

    Push DS-980/DS-980GL top case (number 3) back, then remove it. Install DDR4 SO-DIMM memory into the appropriate SO-DIMM slots. After completed it, please push DS-980/DS-980GL top case (number 3) towards the front side and exactly cover the system. Then, tighten all the screws (num- ber 1 &...

  • Page 29: Inch Sata Storage Installation (Main Layer)

    4 screws (number 1). Push the completed storage module back to the device and exactly ensure the 2.5-inch SATA storage connection with SATA connector inside. Then, tighten 1 screw (number 3) back. Figure 3.3 2.5-inch SATA storage installation (main layer) DS-980/DS-980GL User Manual...

  • Page 30: Inch Sata Ssd Installation (Bottom Layer)

    Carefully put the bottom case down and make sure to cover the whole device, then tighten all the screws (number 1, 2, & 3) back. Figure 3.4 2.5-inch SATA SSD installation (bottom layer) DS-980/DS-980GL User Manual...

  • Page 31: Graphic Card & Fan Duct Installation (Option)

    Carefully attach a fan duct on T mark on the bottom case following the right directions with below photos. Carefully put the bottom case down and make sure to cover the whole device, then tighten all the screws (number 1, 2, & 3) back. Figure 3.5 Graphic card installation DS-980/DS-980GL User Manual...

  • Page 32: Figure 3.6 Fan Duct Location (1)

    Figure 3.6 Fan duct location (1) Figure 3.7 Fan duct location (2) DS-980/DS-980GL User Manual...

  • Page 33: Mini-Pcie Card/ Sim Card/ M.2 Wifi Module Installation (Options)

    (number 6)/ M.2 WIFI module with 1 screw (number 4) on its M.2 2230 slot (number 5). After completed it, please push DS-980/DS-980GL top case towards the front side and exactly cover the system. Then, tighten all the screws (number 1 & 2) back on the chassis.

  • Page 34: Antenna Installation (Options)

    Clean the antenna holes which you want to use and fix the WIFI cable (number 3) on them by rubbers, nuts, and six-angle screws. After completed it, please push DS-980/DS-980GL top case towards the front side and exactly cover the system. Then, tighten all the screws (number 1 & 2) back on the chassis.

  • Page 35: Mounting Brackets Installation

    Mounting Brackets Installation Upside down the device first on a flat and clear floor. Both of DS-980/DS-980GL configurations, using the middle of screw holes to install the mounting brackets (number 2) by 4 screws (number 1) (M3x6L). Exactly ensure the mounting brackets are fixed and stable.

  • Page 36: Stand Rubbers Installation

    Stand Rubbers Installation Upside down the device first on a flat and clear floor. Both of DS-980/DS-980GL configurations, using the outer of screw holes to install the stand rubbers (number 2) by 4 screws (number 1). Upside down the device and exactly make sure the stand rubbers are fixed and keep the device balance.

  • Page 37: Vesa Brackets Installation

    VESA Brackets Installation Upside down the device first on a flat and clear floor. Both of DS-980/DS-980GL configurations, using the middle of screw holes to install the mounting brackets (number 2) by 4 screws (number 1) (M3x6L). Gently place VESA bracket (number 3) on the mounting brackets with the right holes which mark DS-9XX printings and tighten 4 screws (number 4) (M4x 10L) with the opposite directions to the monitor.

  • Page 38: How To Select Suitable Graphic Cards

    3.12 How to Select Suitable Graphic Cards DS-980/DS-980GL is designed for the expansion slot by PCI Express x16 slot at the bottom layer in order to fulfill video wall solution with triple+ displays which depends on what quantities of its outputs a graphic card is. Due to the limited space of DS- 980/DS-980GL bottom layer, there are below criteria to select your suitable graphic card.

  • Page 39: Figure 3.14Maximum A Graphic Card Dimension (Unit: Mm)

    AIR INLET 94.30 16.80 Figure 3.15 Air inlet location Note! To ensure DS-980/DS-980GL operation smoothly, it is better to use sec- ond 12V DC-in AC adapter which we recommended when a graphic card is installed. DS-980/DS-980GL User Manual...
  • Page 40 DS-980/DS-980GL User Manual...

  • Page 41: Bios Settings

    Chapter BIOS Settings This chapter introduces how to set BIOS configuration data.

  • Page 42: Bios Introduction

    AMI BIOS has been integrated into many motherboards for over two decades. With the AMI BIOS Setup program, you can modify BIOS settings and control various sys- tem features. This chapter describes the basic navigation of the DS-980/DS-980GL series BIOS setup screens.

  • Page 43: Entering Setup

    Often a text message will accom- pany it. You can use main setup to check BIOS related information and DS-980/DS-980GL hardware settings, such as project version, build date and time, power type, total memory, memory frequency, ME FW version, and system date/ time.

  • Page 44: Advanced Features Setup

    4.2.2 Advanced Features Setup Select the Advanced tab from the DS-980/DS-980GL setup screen to enter the Advanced BIOS setup screen. You can select any of the items in the left frame of the screen, such as CPU configuration, to go to the sub menu for that item. You can dis- play an Advanced BIOS Setup option by highlighting it using the <Arrow>...

  • Page 45: Figure 4.3 Acpi Setup Screen

    If want to change ACPI sleep state, you can select the highest ACPI sleep state the system will enter the SUSPEND button is pressed. Configuration options: [Suspend Disable][S1 (CPU Stop Clock)][S3 (suspend to RAM)]. Figure 4.3 ACPI Setup Screen DS-980/DS-980GL User Manual...
  • Page 46 PET [Enabled]: User can Enabled/ Disabled PET Events progress to receive PET events or not; Configuration options: [Disabled][Enabled].  AMT CIRA Timeout [0].  WatchDog Timer [Disabled]: Enabled/ Disabled WatchDog Timer; Configuration options: [Disabled][Enabled]. When [Enabled], OS and BIOS WatchDog Timers can be set. DS-980/DS-980GL User Manual...

  • Page 47: Figure 4.4 Amt Configuration

    Figure 4.4 AMT Configuration 4.2.2.3 PCH-FW Configuration Configuration Management Engine Technology Parameter.  Display ME Firmware Information Figure 4.5 PCH-FW Configuration DS-980/DS-980GL User Manual...

  • Page 48: Figure 4.6 Me Fw Image

     Firmware Update Configuration Enabled/ Disabled ME FW image Re-Flash function: Configuration options: [Disable][Enhanced]. Figure 4.6 ME FW image DS-980/DS-980GL User Manual...

  • Page 49: Figure 4.7 Ite8528E Super Io Configuration

    4.2.2.4 ITE8528E Super IO Configuration System Super IO Chip Parameters.  Super IO Configuration: Super IO Chip [ITE8528E]. Figure 4.7 ITE8528E Super IO Configuration DS-980/DS-980GL User Manual...
  • Page 50 Serial Port 1 Configuration: Set Parameters of Serial Port 1. – Serial Port [Enabled]: Enabled/ Disabled Serial Port; Configuration options: [Disabled][Enabled]. – Device Setting [IO=3F8h; IRQ=4]. – Change Setting [Auto]: Select an optimal setting for Super IO device. DS-980/DS-980GL User Manual...

  • Page 51: Figure 4.8 Ite8528E Hw Monitor

    Monitor hardware status (PC health status): Display system health status. Figure 4.8 ITE8528E HW monitor WatchDog Timer [Disabled]: Enabled/ Disabled WatchDog Timer; When [Enabled], you can change WatchDog Timer Mode is based on [Second] and Time out Value [30] you want. Figure 4.9 WatchDog Timer setting DS-980/DS-980GL User Manual...

  • Page 52: Figure 4.10S5 Rtc Wake Setting

    Figure 4.10 S5 RTC wake setting Wake system from S5 [Disabled]: Enabled/ Disabled Wake system from S5; Configu- ration options [Disabled][Enabled] and set up Wake up by day/ hour/ minute/ second [0] you want. Figure 4.11 S5 RTC wake setting DS-980/DS-980GL User Manual...

  • Page 53: Figure 4.12Serial Port Console Redirection

    Redirection; Configuration options: [Disabled][Enabled].  Serial Port for Out-of-Band Management [Disabled]: Microsoft Windows Emer- gency Management Services (EMS) allows for remote management of a Win- dows Server OS though a serial port. Figure 4.12 Serial port console redirection DS-980/DS-980GL User Manual...

  • Page 54: Figure 4.13Com1 - Console Redirection Setting

    Emulation: [ANSI] Extended ASCII Char set.  VT100: ASCII char set.  VT100+: Extends VT100 to support color, functional keys, etc.  VT-UTF8: Uses UTF8 encoding to map Unicode chars onto 1 or more bytes. Figure 4.13 COM1 - Console redirection setting DS-980/DS-980GL User Manual...

  • Page 55: Figure 4.14Legacy Console Redirection Setting

    Select a COM port to display redirection of Legacy OS and Legacy OPROM Mes- sages. Figure 4.14 Legacy console redirection setting Microsoft Windows Emergency Management Services (EMS) allows for remote man- agement of a Windows Server OS through a serial port. Figure 4.15 Serial Port-console redirection setting DS-980/DS-980GL User Manual...

  • Page 56: Figure 4.16Cpu Configuration (1)

     CPU C3 state [Supported]  CPU C6 state [Supported]  CPU C7 state [Supported]  CPU C8 state [Supported]  CPU C9 state [Not Supported]  CPU C10 state [Not Supported] Figure 4.16 CPU Configuration (1) DS-980/DS-980GL User Manual...

  • Page 57: Figure 4.17Cpu Configuration (2)

    CPU C States [Enabled]  Package C State Limit [Auto]  SW Guard Extensions (SGX) [Software Controlled]  Select Owner EPOCH input type [No Change in Owner EPOCHs]  PRMRR Size [Auto] Figure 4.17 CPU Configuration (2) DS-980/DS-980GL User Manual...

  • Page 58: Figure 4.18Intel Txt Information

    4.2.2.9 Intel TXT information Display Intel TXT Parameters. Figure 4.18 Intel TXT information DS-980/DS-980GL User Manual...

  • Page 59: Figure 4.19Sata Configuration

    4.2.2.10 SATA configuration  SATA Mode [AHCI]: Support IDE, AHCI, or RAID mode; Configuration options: [Disabled][IDE][AHCI][RAID].  Serial ATA Port 1: Enabled/ Disabled SATA Device; Configuration options: [Dis- abled][Enabled] Figure 4.19 SATA configuration DS-980/DS-980GL User Manual...

  • Page 60: Figure 4.20Network Stack Configuration – Disabled

    4.2.2.11 Network Stack Configuration Enabled/ Disabled UEFI Network Stack; Configuration options: [Disabled][Enabled]. Figure 4.20 Network Stack Configuration – Disabled Figure 4.21 Network Stack – enable DS-980/DS-980GL User Manual...

  • Page 61: Figure 4.22Csm Configuration

    4.2.2.12 CSM configuration Disabled/ Enabled CSM support; Configuration options: [Disabled][Enabled]. Figure 4.22 CSM Configuration DS-980/DS-980GL User Manual...

  • Page 62: Figure 4.23Usb Configuration

    Disabled/ AUTO/ Disabled USB Configuration; Configuration options: [Enabled][Dis- abled][AUTO].  [Enabled] Legacy USB support.  [AUTO] disables legacy support if no USB devices are connected.  [Disabled] option will only for EFI application. Figure 4.23 USB configuration DS-980/DS-980GL User Manual...

  • Page 63: Chipset

    4.2.3 Chipset Display System Agent (SA) Parameters. Figure 4.24 Chipset DS-980/DS-980GL User Manual...

  • Page 64: System Agent

    4.2.4 System Agent  VT-d [Enabled]: Set VT-d Enabled/ Disabled; Configuration options: [Dis- abled][Enabled].  Graphics Configuration, PEG Port Configuration, and GT – Power Management Control setting options.  Display Memory Configuration information. Figure 4.25 System Agent DS-980/DS-980GL User Manual...

  • Page 65: Figure 4.26Graphic Configuration

    Graphic Configuration: if enabled, it will not scan for external Gfx Card on PEG and PCH PCIE Ports. Figure 4.26 Graphic Configuration PEG Port Configuration: Enabled/ Disabled the Root Port. Figure 4.27 PEG Port Configuration DS-980/DS-980GL User Manual...

  • Page 66: Figure 4.28Pch-Io Configuration

    4.2.4.1 PCH-IO configuration Display PCH Parameters. Check to enabled render standby support. Figure 4.28 PCH-IO configuration DS-980/DS-980GL User Manual...

  • Page 67: Figure 4.29Pci Express Configuration

    DMI Link ASPM Control [Enabled]: Enabled/ Disabled the control of active state power management on SA side of the DMI link; Configuration options: [Dis- abled].  PCIE Port 5 is assigned to LAN: Mini PCI Express & M.2. Figure 4.29 PCI express Configuration DS-980/DS-980GL User Manual...

  • Page 68: Figure 4.30Pci Express Gen3 Eq Lanes

    DPTP [7]  ACS [Enabled] – URR [Disabled] – FER [Disabled] – NFER [Disabled] – CER [Disabled] – CTO [Disabled] – SEFE [Disabled] – SENFE [Disabled] – SECE [Disabled] – PME SCI [Enabled] – Advanced Error Reporting [Enabled] DS-980/DS-980GL User Manual...

  • Page 69: Figure 4.31Mini Pci Express/ M.2 (1)

    PCIE Cm [6]  PCIE LTR [Enabled]  PCIE LTR Lock [Disabled]  PCH PCIe CLKREQ# Configuration: PCIE16 CLKREQ Mapping Override [Default], Snoop Latency Ocerrice [Auto], Non Snoop Latency Ocerride [Auto] Figure 4.31 Mini PCI Express/ M.2 (1) DS-980/DS-980GL User Manual...

  • Page 70: Figure 4.32Mini Pci Express/ M.2 (2)

    Figure 4.32 Mini PCI Express/ M.2 (2) Precondition work on USB host controller and root ports for faster enumeration.  USB Precondition [Disabled]  XHCI Disable Compliance Mode [FALSE]  USB Port Disable Override [Disabled] Figure 4.33 USB configuration DS-980/DS-980GL User Manual...

  • Page 71: Figure 4.34Hd Audio Configuration

    Control Detection of HD-Audio device [Auto]  [Disabled] HDA will be unconditionally disabled.  [Enabled] HDA will be unconditionally enabled.  [Auto] HDA will be enabled if present, disabled otherwise. Figure 4.34 HD Audio Configuration DS-980/DS-980GL User Manual...

  • Page 72: Security

    4.2.5 Security  Administrator Password: Set up Administrator password.  User Password: set up User password. Figure 4.35 Security DS-980/DS-980GL User Manual...

  • Page 73: Boot

    Fast Boot [Disabled]: Enabled/ Disabled boot with initialization of minimal set of devices required to launch active boot option. Has no effect for BBS boot options; Configuration options: [Disabled][Enabled].  New Boot Option Policy [Default]. Figure 4.36 Boot DS-980/DS-980GL User Manual...

  • Page 74: Save & Exit

    Restore Defaults: Restore/ Load default values for all the setup option.  Save as User Defaults: Save the changes done as User Defaults.  Restore User Defaults: Restore the user defaults to all the setup options. Figure 4.37 Save & Exit DS-980/DS-980GL User Manual...
  • Page 75 DS-980/DS-980GL User Manual...
  • Page 76 No part of this publication may be reproduced in any form or by any means, electronic, photocopying, recording or otherwise, without prior written permis- sion of the publisher. All brand and product names are trademarks or registered trademarks of their respective companies. © Advantech Co., Ltd. 2016...

This manual is also suitable for:

Ds-980gl

Table of Contents