Advantech DSA-3400 User Manual page 39

4.4.4 Quick Power On Self Test
This option speeds up the Power-On Self Test (POST) conducted as soon as the computer is
turned on. When enabled, BIOS shortens or skips some of the items during the test. When
disabled, the computer conducts normal POST procedures.
4.4.5 First/Second/Third/ Boot Other Device
The BIOS tries to load the OS with the devices in the sequence selected. Choices are: Floppy,
LS/ZIP, HDD, SCSI, CDROM, LAN, Disabled.
4.4.6 Swap Floppy Drive
Logical name assignments of floppy drives can be swapped if there is more than one floppy
drive. The commands are "Enabled" or "Disabled."
4.4.7 Boot UP Floppy Seek
Selection of the command "Disabled" will speed the boot up. Selection of "Enabled" searches
disk drives during boot up.
4.4.8 Boot Up NumLock Status
This feature selects the "power on" state for NumLock. The commands are "Enabled" or
"Disabled."
4.4.9 Gate A20 Option
Normal: A pin in keyboard controller controls GateA20
Fast (Default): Chipset controls GateA20
The typematic rate is the rate key strokes repeat as determined by the keyboard controller.
The commands are "Enabled" or "Disabled." Enabling allows the typematic rate and delay to
be selected.
4.4.10 Typematic Rate (Chars/Sec)
BIOS accepts the following input values (characters/second) for typematic rate: 6, 8, 10, 12,
15, 20, 24, 30.
4.4.11 Typematic Delay (msec)
Typematic delay is the time interval between the appearance of two consecutive characters,
when holding down a key. The input values for this category are: 250, 500, 750, 1000 (msec).
4.4.12 Security Option