Installing The 2.5" Hard Disk Drive (Hdd) - Advantech DSA-3400 User Manual

Figure 3.6: The mother downside of DSA-3400
6. Plug and Push a DDR SODIMM SDRAM (200pin) into a socket on board.
6. Press down the DRAM module and you will hear the "Click".
7. One reverse the steps could restore the DSA-3400.

3.5 Installing the 2.5" Hard Disk Drive (HDD)

You can attach one enhanced Integrated Device Electronics (IDE) hard disk drive to the DSA-
3400's internal controller which uses a PCI local bus interface. The advanced IDE controller
supports faster data transfer and allows the IDE hard drive to exceed 528 MB.
For the automotive application and harsh (high temperature) environment installation, we
STRONGLY suggest users to use the wide-range 2.5" hard disk driver designed and
manufactured specifically for this application. As we know, Seagate EE25 Series hard drive
and Fujitsu MHT2020AC hard drive can meet higher operating temperature (–30º to 85ºC)
and vibration tolerance (Up to 2.0 Gs). For more information about the wide-range hard drives,
we suggest you Google the "Seagate EE25 Series" and "Fujitsu MHT2020AC" on web. You
should find some useful information from the internet.
The following are instructions for installation:
1. Remove the power line first.
2. Unscrew the 4 screws on HDD mounting top cover of the DSA-3400(refer Figure 3.4: The
Hard Disc of DSA-3400)
Figure 3.7: The Hard Disc mount the top cover of DSA-3400
3. Remove the HDD mounting bottom cover of the DSA-3400.
4. Unscrew the 4 screws on rim of HDD mounting top cover of the DSA-3400
- 33 -