Probe - SANKO PM-101 Operating Instruction

⑤ Lock key (LOCK)
A press of a Lock key locks all the keys except POWER SW ① which prevents erroneous operations.
Switch OFF to release the lock.
⑥ Upper Limit Value Key (H)
Switch on Upper Limit Value Mode.
Set to an optional numerical value with a numerical value setting key ④.
⑦ LCD Display
Measuring Modes, measuring values, upper limit setting, temperature compensating, battery residue, etc.
are to be indicated on the LCD.
⑧ Probe connector receptacle
This is a connector to be hooked up to a probe.
⑨ Hand strap
To protect this instrument from dropping, make sure that the hand strap be hung through over an operator's
wrist.
⑩ Battery Case (back Lower part of a main body)
Batteries are to be placed.

3-2 Probe

Small-size-press-type rubber electrode Probe
⑪ Probe Connector
⑫ Rubber electrode
⑬ Rubber electrode block
⑭ Socket set screw for rubber electrode fixing
⑮ Handle
⑯ Probe Cord
4