If-Exceeding (Policer) - Juniper EX9200 Features Manual

Traffic Policers Feature Guide for EX9200 Switches

if-exceeding (Policer)

Syntax
Hierarchy Level
Release Information
Description
Required Privilege
Level
Related
Documentation
216
if-exceeding {
(bandwidth-limit bps | bandwidth-percent
burst-size-limit bytes;
}
[edit dynamic-profiles profile-name firewall
[edit firewall policer policer-name],
[edit logical-systems logical-system-name firewall
Statement introduced before Junos OS Release 7.4.
Logical systems support introduced in Junos OS Release 9.3.
Support at the
[edit dynamic-profiles ... policer policer-name]
in Junos OS Release 11.4.
Statement introduced in Junos OS Release 12.3R2 for EX Series switches.
Configure rate limits for a single-rate two-color policer.
The remaining statements are explained separately.
firewall—To view this statement in the configuration.
firewall-control—To add this statement to the configuration.
Two-Color Policer Configuration Overview on page 49
Hierarchical Policer Configuration Overview
Basic Single-Rate Two-Color Policers on page 55
Bandwidth Policers on page 75
Filter-Specific Counters and Policers on page 85
Prefix-Specific Counting and Policing Actions on page 97
Multifield Classification on page 115
Policer Overhead to Account for Rate Shaping in the Traffic Manager on page 135
Hierarchical Policers
number);
policer policer-name],
policer policer-name]
hierarchy level introduced
Copyright © 2016, Juniper Networks, Inc.