Load-Balance-Group; Logical-Bandwidth-Policer - Juniper EX9200 Features Manual

load-balance-group

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation

logical-bandwidth-policer

Syntax
Hierarchy Level
Release Information
Description
Required Privilege
Level
Related
Documentation
Copyright © 2016, Juniper Networks, Inc.
load-balance-group group-name {
next-hop-group [ group-names ];
}
[edit firewall]
Statement introduced before Junos OS Release 7.4.
Configure a load-balance group.
group-name —Name of load-balance group.
—Name of next-hop groups to include in the load-balance group set.
group-names
firewall—To view this statement in the configuration.
firewall-control—To add this statement to the configuration.
Configuring Load-Balance Groups in the Routing Policies, Firewall Filters, and Traffic
Policers Feature Guide
logical-bandwidth-policer;
[edit dynamic-profiles profile-name firewall
[edit firewall policer policer-name],
[edit logical-systems logical-system-name firewall
Statement introduced in Junos OS Release 8.2.
Logical systems support introduced in Junos OS Release 9.3.
Support at the
[edit dynamic-profiles ... policer policer-name]
in Junos OS Release 11.4.
Statement introduced in Junos OS Release 12.3R2 for EX Series switches.
For a policer with a bandwidth limit configured as a percentage (using the
statement), specify that the percentage be based on the shaping
bandwidth-percent
rate defined on the logical interface, rather than on the media rate of the physical interface.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Bandwidth Policers on page 75
Configuring Policers Based on Logical Interface Bandwidth
bandwidth-percent on page 201
interface-specific statement
Chapter 18: Configuration Statements
policer policer-name],
policer policer-name]
statement
hierarchy level introduced
221