Juniper EX9200 Features Manual page 68

Traffic Policers Feature Guide for EX9200 Switches
Table 7: Two-Color Policer Configuration and Application Overview (continued)
Policer Configuration
}
50
Layer 3 Application
}
Method B—Apply as a firewall filter policer at the
protocol family level:
[edit firewall]
family family-name {
filter filter-name {
interface-specific; # (*)
from {
... match-conditions ...
}
then {
policer policer-name;
}
}
}
[edit interfaces]
interface-name {
unit unit-number {
family family-name {
filter {
input filter-name;
output filter-name;
}
... protocol-configuration ...
}
}
}
Key Points
Interface policer verification:
Use the
show interfaces
(detail | extensive)
operational mode command.
Use the
show policer
operational mode command.
Firewall filter policer verification:
Use the
show interfaces
(detail | extensive)
operational mode command.
Use the
show firewall filter
filter-name operational mode
command.
Copyright © 2016, Juniper Networks, Inc.