Specifications - Sony CCU-700A Operation Manual

Specifications

General
Power requirements
CCU-700A 120 V AC, 50/60 Hz
CCU-700AP 110 to 120 V/220 to 240 V AC
selectable, 50/60 Hz
Power consumption
CCU-700A 450 VA max. for entire
system
CCU-700AP 4 A max. for entire system
Cable length 2,000 m (6,560 feet) max.
(ø14.5 mm (
wide-band triax)
Operating temperature
5°C to 40°C (41°F to 104°F)
Approx. 424 × 133 × 400 mm
Dimensions
(w/h/d)
(16
Mass Approx. 19 kg (41 lb 14 oz)
Input connectors
ANALOG INPUT
REFERENCE BNC type (1, with
loopthrough output)
VBS: 1.0 Vp-p, 75 ohms
RET 1, RET 2, RET 3, and RET 4
BNC type (1 each, with
loopthrough output)
1.0 Vp-p, 75 ohms
PROMPTER BNC type (1, with
loopthrough output)
1.0 Vp-p, 75 ohms
DIGITAL VIDEO
SERIAL INPUT RET 1 and RET 2
(when the BKP-7312 is
installed)
BNC type (1 each)
4:2:2 component serial digital
video signal (270 Mb/s)
0.8 Vp-p, 75 ohms
⁄AC IN
3-pin (1)
Output connectors
ANALOG OUTPUT
VBS1, VBS2, and VBS3
BNC type (1 each)
VBS: 1.0 Vp-p, 75 ohms
R, G, and B BNC type (1 each)
0.7 Vp-p, 75 ohms
8
19
/ inches)
32
× 5 × 15
3 1 3
/ / / inches)
4 4 4
Y, R–Y, and B–Y BNC type (1 each)
CCU-700A:
Y: 1.0 Vp-p (video: 0.714,
sync: 0.286), 75 ohms
R–Y: 0.7 Vp-p, 75 ohms
(75% CB)
B–Y: 0.7 Vp-p, 75 ohms
(75% CB)
CCU-700AP:
Y: 1.0 Vp-p (video: 0.7,
sync: 0.3), 75 ohms
R–Y: 0.525 Vp-p, 75 ohms
(75% CB)
B–Y: 0.525 Vp-p, 75 ohms
(75% CB)
PIX 1 and PIX 2 BNC type (2)
1.0 Vp-p, 75 ohms
WF 1 and WF 2 BNC type (2)
CCU-700A: 0.714 Vp-p,
75 ohms
CCU-700AP: 0.7 Vp-p,
75 ohms
ENC: 1.0 Vp-p
SYNC BNC type (1)
0.3 Vp-p, 75 ohms, negative
CHARACTER BNC type (1)
Video: 0.3 Vp-p,
Sync:
CCU-700A: 0.286 Vp-p
CCU-700AP: 0.3 Vp-p
DIGITAL VIDEO
SERIAL OUTPUT 1, 2, and 3
(when the BKP-7311 is
installed)
BNC type (1 each)
4:2:2 component serial digital
video signal (270 Mb/s)
0.8 Vp-p, 75 ohms
MIC OUTPUT CH1, and CH2
XLR 3-pin, male, 1 each
0 dB/–20 dB selectable with
the switch on the AT board
WF MODE 4-pin (1)