SONY MP-LCS - Lens Cover Stand Instructions And Review

SONY MP-LCS - Lens Cover Stand Instructions And Review

Advertisement

SONY MP-LCS - Lens Cover Stand Instructions And Review

How to use

Compatible Devices: MP-CL1/MP-CL1A
Attach the Lens Cover Stand to MP-CL1/MP-CL1A.
This allows you to project at various angles and use as lens cover.

When protecting the projector's lens (A)
When protecting the projector’s lens
Attach the lens cover stand by sliding from left to right.

When projecting on a wall or in front (B)
When projecting on a wall or in front
Attach the lens cover stand by sliding from left to right, then rotate the stand and adjust the tilt of the projector to set the projection position. You can choose from two angles.

When projecting on the ceiling (C)
When projecting on the ceiling
Attach the lens cover stand by sliding it from the bottom to the top, then rotate the stand.

Note

warning
Slide the lens cover stand when you attach or remove it from the mobile projector.

Specifications

Dimensions: 77.0 mm × 17.1 mm × 19.1 mm (3 1/8 inches × 11/16 inches × 25/32 inches) (W/H/L)
Weight: Approx. 9.0 g (0.3 oz.)
Operating temperature: 0°C to 35°C (32°F to 95°F)

Precautions

  • Before using this lens cover stand, please read the precautions in this operating manuals.
  • Do not touch or stick your finger into the connection parts.
  • Use on a stable or flat surface when using the projector with the lens cover stand.
  • Do not apply strong force to the lens cover stand.

Warranty

Our product warranty is limited only to the unit itself, when used normally in accordance with the operating instructions and the system environment. Therefore, Customer acknowledges and agrees that:

  • Sony is not liable for damage or loss resulting from the use of this product, or for any claim from a third party.
  • Sony is not liable for problems with your cell phone or other hardware arising from the use of this product; the suitability of the product for specific hardware, software, or peripherals; operating conflicts with other installed software; data loss; or other accidental or unavoidable damages.
  • Sony is not liable for financial damages, lost profits, claims from third parties, etc., arising from the use of this product.

Videos

Sony MP-CL1A Mobile Projector Hands-on Review

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download SONY MP-LCS - Lens Cover Stand Instructions And Review

Advertisement

Need Assistance?

Do you have a question about the MP-LCS that isn't answered in the manual? Leave your question here.

Error while submitting your question. Please, reload page and try again.

Thank you! Your question has been received!

Table of Contents