Setting Super Password Control Parameters - H3C S5830V2 Security Configuration Manual

Step
2. Create a device management
user and enter local user view.
3. Configure the password
expiration time for the local
user.
4. Configure the minimum
password length for the local
user.
Configure the password
5.
composition policy for the
local user.

Setting super password control parameters

The super password allows you to obtain a temporary user role without reconnecting to the device. For
more information, see Fundamentals Configuration Guide.
To set super password control parameters:
Step
1. Enter system view.
2. Set the password expiration
time for super passwords.
3. Configure the minimum length
for super passwords.
Command
local-user user-name class manage
password-control aging aging-time
password-control length length
password-control composition
type-number type-number
[ type-length type-length ]
Command
system-view
password-control super aging
aging-time
password-control super length
length
110
Remarks
By default, no local user exists.
Local user password control
applies to device management
users instead of network access
users.
For information about how to
configure a local user, see
"Configuring AAA."
By default, the setting equals that
for the user group to which the
local user belongs. If no expiration
time is configured for the user
group, the global setting applies to
the local user.
By default, the setting equals that
for the user group to which the
local user belongs. If no minimum
password length is configured for
the user group, the global setting
applies to the local user.
By default, the settings equal those
for the user group to which the
local user belongs. If no password
composition policy is configured
for the user group, the global
settings apply to the local user.
Remarks
N/A
The default setting is 90 days.
•
In non-FIPS mode, the default
length is 10 characters.
•
In FIPS mode, the default length
is 15 characters.