H3C S5830V2 Security Configuration Manual page 189

Task
Connect to the SCP
server, and transfer files
with the server.
Command
•
Connect to the IPv4 SCP server, and transfer files with this
server:
In non-FIPS mode:
scp server [ port-number ] [ vpn-instance
vpn-instance-name ] { put | get } source-file-name
[ destination-file-name ] [ identity-key { dsa | rsa } |
prefer-compress zlib | prefer-ctos-cipher { 3des |
aes128 | aes256 | des } | prefer-ctos-hmac { md5 |
md5-96 | sha1 | sha1-96 } | prefer-kex
{ dh-group-exchange | dh-group1 | dh-group14 } |
prefer-stoc-cipher { 3des | aes128 | aes256 | des } |
prefer-stoc-hmac { md5 | md5-96 | sha1 |
sha1-96 }] * [ publickey keyname | source { interface
interface-type interface-number | ip ip-address } ] *
In FIPS mode:
scp server [ port-number ] [ vpn-instance
vpn-instance-name ] { put | get } source-file-name
[ destination-file-name ] [ identity-key rsa |
prefer-compress zlib | prefer-ctos-cipher { aes128 |
aes256 } | prefer-ctos-hmac { sha1 | sha1-96 } |
prefer-kex dh-group14 | prefer-stoc-cipher { aes128
| aes256 } | prefer-stoc-hmac { sha1 | sha1-96 }] *
[ publickey keyname | source { interface
interface-type interface-number | ip ip-address } ] *
•
Connect to the IPv6 SCP server, and transfer files with this
server:
In non-FIPS mode:
scp ipv6 server [ port-number ] [ vpn-instance
vpn-instance-name ] [ -i interface-type
interface-number ] { put | get } source-file-name
[ destination-file-name ] [ identity-key { dsa | rsa } |
prefer-compress zlib | prefer-ctos-cipher { 3des |
aes128 | des } | prefer-ctos-hmac { md5 | md5-96 |
sha1 | sha1-96 } | prefer-kex { dh-group-exchange |
dh-group1 | dh-group14 } | prefer-stoc-cipher { 3des
| aes128 | des } | prefer-stoc-hmac { md5 | md5-96
| sha1 | sha1-96 }] * [ publickey keyname | source
{ interface interface-type interface-number | ipv6
ipv6-address } ] *
In FIPS mode:
scp ipv6 server [ port-number ] [ vpn-instance
vpn-instance-name ] [ -i interface-type
interface-number ] { put | get } source-file-name
[ destination-file-name ] [ identity-key rsa |
prefer-compress zlib | prefer-ctos-cipher { aes128 |
aes256 } | prefer-ctos-hmac { sha1 | sha1-96 } |
prefer-kex dh-group14 | prefer-stoc-cipher { aes128
| aes256 } | prefer-stoc-hmac { sha1 | sha1-96 }] *
[ publickey keyname | source { interface
interface-type interface-number | ipv6
ipv6-address } ] *
175
Remarks
Use one of the
commands.
Available in user
view.