H3C S5830V2 Security Configuration Manual page 115

Port security is enabled globally
AutoLearn aging time is 0 minutes
Disableport Timeout: 20s
OUI value:
Ten-GigabitEthernet1/0/1 is link-up
Port mode: macAddressElseUserLoginSecure
NeedToKnow mode: NeedToKnowOnly
Intrusion protection mode: NoAction
Max number of secure MAC addresses: 64
Current number of secure MAC addresses: 0
Authorization is permitted
After users pass authentication, you can use the following commands to display the user authentication
information on the port:
# Display MAC authentication information.
[Device] display mac-authentication interface ten-gigabitethernet 1/0/1
MAC address authentication is enabled
User name format is fixed account
Fixed username: aaa
Fixed password: ******
Offline detect period is 60s
Quiet period is 5s
Server response timeout value is 100s
Max number of users is 1024 per slot
Current number of online users is 3
Current authentication domain is sun
Silent MAC user info:
MAC Addr
Ten-GigabitEthernet1/0/1 is link-up
MAC address authentication is enabled
Max number of online users is 256
Current number of online users is 3
Current authentication domain: Not configured
Authentication attempts: successful 3, failed 7
MAC Addr
1234-0300-0011
1234-0300-0012
1234-0300-0013
# Display 802.1X authentication information.
[Device] display dot1x interface ten-gigabitethernet 1/0/1
802.1X protocol is enabled globally
CHAP authentication is enabled
Configuration: Transmit Period
Quiet Period
Supp Timeout
From Port
Auth state
authenticated
authenticated
authenticated
30 s,
60 s,
30 s,
101
Port Index
Handshake Period
Quiet Timer is disabled
Server Timeout
15 s
100 s