Displaying And Maintaining Password Control; Password Control Configuration Example; Network Requirements - H3C S5830V2 Security Configuration Manual

Step
4. Configure the password
composition policy for super
passwords.

Displaying and maintaining password control

Execute display commands in any view and reset commands in user view.
Task
Display password control configuration.
Display information about users in the
password control blacklist.
Delete users from the password control
blacklist.
Clear history password records.
NOTE:
The reset password-control history-record command can delete the history password records of one or
all users even when the password history function is disabled.

Password control configuration example

Unless otherwise noted, devices in the configuration example are operating in non-FIPS mode.

Network requirements

Configure a global password control policy to meet the following requirements:
An FTP or VTY user failing to provide the correct password in two successive login attempts is
•
permanently prohibited from logging in.
A user can log in 5 times within 60 days after the password expires.
•
A password must contain at least 16 characters.
•
• A password expires after 30 days.
The minimum password update interval is 36 hours.
•
The maximum account idle time is 30 days.
•
• A password cannot contain the username or the reverse of the username.
Command
password-control super
composition type-number
type-number [ type-length
type-length ]
Command
display password-control [ super ]
display password-control blacklist [ user-name name | ip
ipv4-address | ipv6 ipv6-address ]
reset password-control blacklist [ user-name name ]
reset password-control history-record [ user-name name |
super [ role role name ] ]
111
Remarks
•
In non-FIPS mode, a default
super password must contain at
least one character type and at
least one character for each
type.
•
In FIPS mode, a default super
password must contain four
character types and at least
one character for each type.