Exporting Certificates - H3C S5830V2 Security Configuration Manual

CAUTION:
If you change the storage path, save the configuration before you reboot or shut down the device to avoid
loss of the certificates or the CRLs.
The device has a default storage path for the obtained local certificates and CRLs. You can change the
storage path and specify different paths for the certificates and CRLs.
After you change the storage path for the certificates or CRLs, the certificate files (with the file
extension .cer or .p12) and CRL files (with the extension .crl) in the original path are moved to the new
path.
To specify the storage path for the certificates and CRLs:
Task
Specify the storage path for
the certificates and CRLs.

Exporting certificates

IMPORTANT:
To export all certificates in the PKCS12 format, the PKI domain must have at least one local certificate.
Otherwise, the export operation fails.
To back up or import certificates, you can export the CA certificate and the local certificates in a PKI
domain to local files or display them on a terminal.
When you export a local certificate with the RSA key pair, the name of the target file might not be the
same as specified in the command. It depends on the purpose of the key pair of the certificate.
To export certificates:
Step
1. Enter system view.
2. Export certificates.
Command
pki storage { certificates |
crls } dir-path
Command
system-view
•
Export certificates in DER format:
pki export domain domain-name der { all |
ca | local } filename filename
•
Export certificates in PKCS12 format:
pki export domain domain-name p12 { all |
local } passphrase p12passwordstring
filename filename
•
Export certificates in PEM format:
pki export domain domain-name pem { { all |
local } [ { 3des-cbc | aes-128-cbc |
aes-192-cbc | aes-256-cbc | des-cbc }
pempasswordstring ] | ca } [ filename
filename ]
137
Remarks
By default, the storage path for the certificates
and CRLs is the PKI directory on the storage
media of the device.
Remarks
N/A
Configure at least one
command.
If you do not specify a file name
when you export a certificate in
PEM format, the certificate is
displayed on the terminal.