Supplement; Technical Data - Vega VEGASWING 51 Operating Instructions Manual

9

Supplement

9.1

Technical data

General data
Material 316L corresponds to 1.4404 or 1.4435
Materials, wetted parts
Ʋ Tuning fork
Ʋ Process seal
Ʋ Process fittings
Materials, non-wetted parts
Ʋ Housing
Weight approx.
Process fittings
Ʋ Pipe thread, cylindrical (DIN 3852-A)
Ʋ American pipe thread, conical
(ASME B1.20.1)
Ʋ hygienic fittings
Max. torque - process fitting
Ʋ Thread G½ A, ½ NPT
Ʋ Thread G¾ A, ¾ NPT
Ʋ Thread G1 A, 1 NPT
Surface quality
Ʋ Standard
Ʋ Hygienic version
Measuring accuracy
Hysteresis
Switching delay
Measuring frequency
Ambient conditions
Ambient temperature on the housing
Storage and transport temperature
Process conditions
Process pressure
Process temperature - Standard
VEGASWING 51 • - transistor (PNP)
316L
Klingersil C-4400
316L
316L and plastic PEI
250 g (9 oz)
G½ A, G¾ A, G1 A
½ NPT, ¾ NPT, 1 NPT
Clamp 1", Clamp 1½", Clamp 2" PN 16 DIN 32676,
ISO 2852/316L, bolting DN 25 PN 40, bolting DN 40
PN 40, bolting DN 50 PN 25, SMS DN 38 PN 6
50 Nm (37 lbf ft)
75 Nm (55 lbf ft)
100 Nm (73 lbf ft)
R < 3.2 µm (1.26 in)
-4
a
R < 0.8 µm (3.15 in)
-5
a
approx. 2 mm (0.08 in) with vertical installation
approx. 500 ms (on/off)
approx. 1100 Hz
-40 ... +70 °C (-40 ... +158 °F)
-40 ... +80 °C (-40 ... +176 °F)
-1 ... 64 bar/-100 ... 6400 kPa (-14.5 ... 928 psig)
-40 ... +100 °C (-40 ... +212 °F)
9 Supplement
21