Lldp Settings; 802.1X Mode; Table 7: Gac2500 Vlan Configuration Parameters; Table 8: Gac2500 Lldp Configuration Parameters - Grandstream Networks GAC2500 User Manual

Audio conference phone for android
Hide thumbs Also See for GAC2500:
Table of Contents

Advertisement

If the GAC2500 is connected to VPN successfully, icon
connection is failed, a prompt box will pop up to remind users whether to connect again. If icon
displays in the top status bar, please check whether your VPN configuration is correct.
Parameters
Descriptions
Assigns the VLAN Tag of the Layer 2 QoS packets for LAN port. Default value is 0.
Layer 2 QoS
Note: Please do not change the setting before understanding the VLAN's settings or
802.1q/VLAN Tag
consulting the network administrator. Otherwise, the device might not be able to get
the correct IP address.
Layer 2 QoS
Assigns the priority value of the Layer 2 QoS packets. Default value is 0.
802.1p Priority

LLDP SETTINGS

Access GAC2500 home screen, go to Settings->Advanced settings->Wireless & network->Additional
network settings to configure LLDP settings on the GAC2500.
Parameters
Descriptions
LLDP
Enable or disable LLDP. The default setting is disabled.
Layer 3 QoS for
This field defines the layer 3 QoS parameter for SIP packets. It is the value used for
IP Precedence, Diff-Serv or MPLS. The Default value is 48.
SIP
Layer 3 QoS for
This field defines the layer 3 QoS parameter for audio packets. It is the value used for
Audio
IP Precedence, Diff-Serv or MPLS. The Default value is 48.
LLDP TX
Configures the interval the phone sends LLDP-MED packet, the default setting is 30s.
Interval(s)

802.1X MODE

Access GAC2500 home screen, go to Settings->Advanced settings->Wireless & network->Additional
network settings->802.1X Mode. By default, 802.1X is disabled. Select 802.1X mode to "EAP-MD5", "EAP-
TLS5" or "EAP-PEAP" to turn on 802.1X. Once 802.1X mode is enabled, the user will be required to enter
the identity and Password to be authenticated in the network.
Parameters
Descriptions
Allows the user to enable/disable 802.1X and configure 802.1X mode. The default
802.1x Mode
setting is disabled.
Dit document wordt u aangeboden door TelecomHunter.
Dé zakelijke Telecom webshop.
T 088 7463 444 | @ sales@TelecomHunter.nl | www.TelecomHunter.nl

Table 7: GAC2500 VLAN Configuration Parameters

Table 8: GAC2500 LLDP Configuration Parameters

Table 9: GAC2500 802.1X Mode Parameters

GAC2500 User Guide
will be shown in the top status bar; if the
P a g e
| 40

Advertisement

Table of Contents
loading

Table of Contents