Ip Mode; Usb Slave Mode; Figure 5: Gac2500 Slave Mode Screen - Grandstream Networks GAC2500 User Manual

IP Mode

The GAC2500 is used as an independent phone in IP mode. Please follow the steps below to connect.
Connect the LAN port of the device to the external network port (the port in the office or at home) via
1.
Ethernet cable;
Plug in the power adapter into the power supply interface then power up the GAC2500.
2.
Note: It is recommended to use IP mode in room 3.6m* 7.2m or smaller.

USB Slave Mode

GAC2500 can be used as auxiliary device for GVC3200 or PC for audio acquisition and play. The
conference feature will be disabled in USB slave mode. Follow the steps below to connect route.
Connect one end of the USB cable to the Micro USB port of the device and the other end to the USB
1.
port of GVC3200/PC;
Plug in the power adapter into the power supply interface then power up the GAC2500.
2.
The GAC2500 screen is as shown below in USB slave mode.
Call
-
Tape on the Call icon to see the GVC3200 call screen, users can make Audio/Video calls, share contents,
Hold/UnHold, Record, Enable/Disable DND, and add more users to the conference.
Contacts
-
Tape on contact and a list of the GVC3200 will show up, users can search, make calls and sync with
GVC3200 contacts if a new entry is added from the GVC3200.
Schedule
-
Tape on Schedule to view all the scheduled meeting from GVC3200.
PTZ
-
Tape on PTZ to access the GVC3200 PTZ settings, users could control PTZ movement in camera mode,
set presets, zoom In/Out and adjust the focus.
Dit document wordt u aangeboden door TelecomHunter.
Dé zakelijke Telecom webshop.
T 088 7463 444 | @ sales@TelecomHunter.nl | www.TelecomHunter.nl

Figure 5: GAC2500 Slave Mode Screen

GAC2500 User Guide
P a g e | 22