3.
The GAC2500 scans and displays the IDs of all available Bluetooth devices in range. Once the
Bluetooth device shows up in the result, tap on it to start pairing.
4.
Confirm the passkey in the prompted message (if any). Or if passcode is required, please refer to the
device's documentation or other procedures to obtain the passcode.
Connecting to a Bluetooth Device
After successfully paired, the device will be connected to the GAC2500 immediately. Users will see this
device listed under "Paired Devices". Tap on
"Rename", "Unpair" and etc.
If the connection is lost between the Bluetooth device and GAC2500, go to LCD menu -> Settings ->
Bluetooth->Bluetooth setting and click on the device name under "Paired devices" again to reconnect.
When enabled headset mode, the connected Bluetooth device could use GAC2500 as a headset audio
device. You can see the Bluetooth device is displayed as an account on the left home screen. You can
make dial-ups with this account directly, or as a party to join conference.
Dit document wordt u aangeboden door TelecomHunter.
Dé zakelijke Telecom webshop.
T 088 7463 444 | @ sales@TelecomHunter.nl | www.TelecomHunter.nl
next to the connected device. Users will see options
Figure 23: GAC2500 Bluetooth - Paired Device
Figure 24: GAC2500 Bluetooth – Headset Mode
GAC2500 User Guide
P a g e
| 38