Technical Specifications - K-array KF212 User Manual

KF212

10. TEChNICAL SpECIFICATIONS

Max Power Handling
Impedance
Frequency range (-10 dB)
SPL 1W/1mt
Maximum SPL
Horizontal
Vertical
Frequency
Connectors
Dimensions (LxHxD)
Weight
Notes for data
1. Measured @4 mt then scaled @ 1m;
2. Measured with musical signal
New materials and design are introduced into existing products without previous notice.
Present systems may differ in some respects from those presented in this catalogue.
The contents of this manual are furnished for informational purposes only. K-array s.u.r.l. assumes no responsibility for any errors or inaccuracies that may
appear in this manual. K-array s.u.r.l. reserves the right to make modifications without prior notice.
ACOUSTICS
700 W
8 Ω
40 Hz – 19000 Hz
100 dB
(1)
124 dB (cont.) – 130 dB (peak)
COVERAGE
90°
60°
CROSSOVER
Type Internal passive crossover
2500 Hz
TRANSDUCERS
1 x 12" coaxial ferrite magnet woofer with 3" voice coil + titanium
Type
dome with 1.7" voice coil
Type 1 x 12" passive radiator
POWER AUDIO IN/OUT
1 x 4-pin phoenix connector (only 2 pins used)
RECOMMENDED AMPLIFIERS
KA84
CERTIFICATION
56 (More complete water protection with K-KUIP accesspry)
PHYSICAL
33.0 cm x 65.5 cm x 20.0 cm (12.9" x 25.7" x 7.8")
23.5 kg (51.8 lbs)
(2)
Ver. 1.0
13