Technical Specifications - K-array KAN200 User Manual

KAN200 - KAN200+

13. TeChnICal speCIfICaTIons

KAN200
ACOUSTICS
Power handling 150 W
Max Power 300 W
64 Ω
Impedance
Frequency range 150 Hz – 18 kHz +/-6dB
SPL 1W/1mt 86 dB
Maximum SPL 96 dB (cont.) – 102 dB (peak)
COVERAGE
Horizontal 160°
Vertical 10°
CROSSOVER
Type External crossover required
Frequency 50 Hz 24dB/oct suggested minimum
TRANSDUCERS
8 x 1" Neodymium cone driver with 0.75"
Type
voice coil
POWER AUDIO IN/OUT
Connectors 2 x 4-pin Speakon (1 female, 1 male)
Wiring 1+ 1- (signal IN & LINK) 2+ 2- (Through)
RECOMMENDED AMPLIFIERS
Type KMT12, KMT18, KA84
CERTIFICATION
IP 55
PHYSICAL
201.9 x 5.6 x 3.5 cm
Dimensions
(79.5" x 2.2" x 1.4")
Weight 1.4 kg (3.1 lbs)
Notes for data
1. Maximum RMS applicable power for a musical signal. The reference signal is the one
proposed by EIAJ standard;
2. With dedicated preset;
3. Mesured @8 m, then scaled @1 m;
4. Mesured with musical signal;
New materials and design are introduced into existing products without previous notice.
Present systems may differ in some respects from those presented in this catalogue.
The contents of this manual are furnished for informational purposes only. K-array s.u.r.l. assumes no responsibility for any errors or inaccuracies that may
appear in this manual. K-array s.u.r.l. reserves the right to make modifications without prior notice.
(AES)
(1)
(2)
(3)
(4)
KAN200+
ACOUSTICS
Power handling 300 W
Max Power 600 W
Impedance 32 Ω
Frequency range 150 Hz – 18 kHz +/-6dB
SPL 1W/1mt 86 dB
Maximum SPL 102 dB (cont.) – 108 dB (peak)
COVERAGE
Horizontal 160°
Vertical 10°
CROSSOVER
Type External crossover required
Frequency 50 Hz 24dB/oct suggested minimum
TRANSDUCERS
16 x 1" Neodymium cone driver with 0.75"
Type
voice coil
POWER AUDIO IN/OUT
Connectors 2 x 4-pin Speakon (1 female, 1 male)
Wiring 1+ 1- (signal IN & LINK) 2+ 2- (Through)
RECOMMENDED AMPLIFIERS
Type KMT12, KMT18, KA84
CERTIFICATION
IP 55
PHYSICAL
201.9 x 5.6 x 3.5 cm
Dimensions
(79.5" x 2.2" x 1.4")
Weight 1.9 kg (4.2 lbs)
(AES)
(1)
(2)
(3)
(4)
Ver. 2.0
12