Technical Specifications - K-array KZ12 User Manual

KZ12

11. TECHNICaL SPECIfICaTIONS

ACOUSTICS
Power handling 8 W
(AES)
Max power 15W
(1)
Frequency range 250 Hz – 18 kHz +/- 3dB
Impedance 16 Ω
SPL 1W/1mt 82 dB
Maximum SPL 92 dB (cont.) – 98dB (peak)
COVERAGE
Horizontal 140°
Vertical 20°
CROSSOVER
Type External Crossover required
250 Hz, 24 dB/oct
Frequency
suggested minimum
Notes for data
1. Maximum RMS applicable power for a musical signal. The reference signal is the one proposed by EIAJ
standard
2. With dedicated preset
3. Measured @4m then scaled @ 1m
4. Measured with musical signal
New materials and designs are introduced into existing products without prior notice. Present systems may
differ in some respects from those presented in this catalogue.
The contents of this manual are furnished for informational purposes only. K-array s.u.r.l. assumes no responsibility for any errors or inaccuracies that may
appear in this manual. K-array s.u.r.l. reserves the right to make modifications without prior notice.
(2)
(3)
(4)
TRANSDUCERS
Full-range 4 x 0.5" cone driver with 0.5" voice coil
POWER AUDIO INPUT
Connector IN+ IN- (to be soldered or screwed)
RECOMMENDED AMPLIFIERS
Type KA24, KMT12 (up to 4 units per channel)
CERTIFICATION
IP 54
PHYSICAL
2.1 x 10.0 x 1.2 cm
Dimensions
(0.8"x 3.9"x 0.5")
Weight 45.5 g (0.10 lbs)
Ver. 2.2
11