Technical Specifications - K-array KX12 User Manual

KX12

11. TEChNICAL SPECIfICATIoNS

ACOUSTICS
Power handling 800 + 200 W
Max power 1200 W
Frequency range (-3 dB) 120 Hz – 19 kHz
8 Ω
Impedance
SPL 1W/1mt 102 dB
Maximum SPL 127 dB (cont.) – 133 dB (peak)
COVERAGE
Horizontal 100°/30° (depending on horn orientation)
Vertical 30°/100° (depending on horn orientation)
CROSSOVER
Type External Crossover required
High pass @ 120 Hz, 24 dB/oct
Frequency
suggested minimum
Notes for data
1. Maximum RMS applicable power for a musical signal. The reference signal is the one proposed by EIAJ
standard
2. With dedicated preset
3. Measured @ 4m then scaled @ 1m
4. Measured with musical signal
New materials and designs are introduced into existing products without prior notice. Present systems may
differ in some respects from those presented in this catalogue.
The contents of this manual are furnished for informational purposes only. K-array s.u.r.l. assumes no responsibility for any errors or inaccuracies that may
appear in this manual. K-array s.u.r.l. reserves the right to make modifications without prior notice.
(1)
(2)
(3)
(4)
TRANSDUCERS
12" Neodymiun magnet Woofer with 3"
voice coil
COAXIAL
Neodymium magnet compression driver
with 2" Voice Coil
POWER AUDIO INPUT/OUTPUT
Connector 2 x 4-pin Speakon
Wiring 1+ 1- (Signal IN & LINK ) 2+ 2- (Through)
RECOMMENDED AMPLIFIERS
Type KMT18, KMT21, KMT218, KA84
CERTIFICATION
IP 21
PHYSICAL
34.0 cm x 32.0 cm x 20.0 cm
Dimensions
(13.4" x 12.6" x 7.9")
Weight 12.2 kg (26.9 lbs)
Ver. 1.4
21