Toshiba GA-1120 Printing Manual page 101

A
A-13 Print Options
Stapler Mode
Stapling is supported on the copier with a sorter/stapler unit attached.
To enable the Stapler Mode option, Sorter Mode must be set to Sort.
N :
OTE
—Disables the stapler.
Off
—The job is stapled with one staple along one corner of the page edge that last
Corner
exits the copier.
—The job is stapled with two staples along the page edge that last exits the
Double
copier.
Finisher with Saddle Stitcher
staples in the center of the page.
The Saddle Stitch Finisher can be enabled by using DocBuilder Pro from
N :
OTE
Command WorkStation. See the following procedure.
Corner
The stapler supports the following paper sizes:
• Letter, Letter-R
• Legal
• Tabloid (11"
• A4, A4-R
• A3
—The job is printed like a booklet on both sides with
Double
x 17")
Saddle Stitch