Sending A Scan Job To A Specific Destination - Toshiba GA-1120 Printing Manual

5
5-13 Scanning to the GA-1120 hard disk drive
9. Select the Background adjustment.
10. Select the Original Size of your scan job.
Select LD, LT-R, ST-R, LT, or LG for US region. Select A3, A4, A4-R, A5-R, B4, B5,
B5-R for UK region.
11. Press OK when you are finished setting the scan options.
To select a scan file destination, see the following procedures.
Sending a scan job to a specific destination
When you initiate the scan, you select where to send the file. After you select the
appropriate settings for your scan job using the previous procedure, you can specify the
location to send the scan. You can send the scan to a mailbox, to the Hold queue, or to
an e-mail address.
You can send the scan to an e-mail address only if you have set up e-mail service
N :
OTE
in advance. For more information, see the
T
O SEND A SCAN FILE TO THE MAILBOX
1. After you have selected your settings, under Destination on the Touch Panel screen,
select Mailbox.
2. Select a Mailbox ID and select Set.
Enter a mailbox number from 0-9999.
3. Select PDF, TIFF, or JPEG as a File Format and select Set.
Multiple JPEG images in a single file are not supported.
N :
OTE
4. Enter a File name for your job and touch Set.
If you do not enter a File name, the default name is
5. Select Scan!
6. Select Finish to complete the scan or Cancel Job to cancel the scan.
To retrieve the scan file, see
Configuration
MMDDHHMM
"Retrieving scan files" on page 5-8.
Guide.
.