Toshiba GA-1120 Printing Manual page 17

1
1-5 Printing from applications
8. In the Instructions area, enter instructions to the operator about the job and click OK.
These instructions can be displayed in Command WorkStation, but do not appear in
the Job Log. These instructions can be edited by the operator.
9. Click the remaining print option bars to specify the appropriate settings for the print
job and click OK.
These print options are specific to the GA-1120 and the copier. They override settings
specified in GA-1120 Printer Setup, but can be overridden from the job management
tools.
The term "job management tools" is used in this manual to refer to Command
N :
OTE
WorkStation, Fiery Spooler, and Fiery WebSpooler.
For information about these options and overrides, see
For information on configuring installable options, see the
Guide.
For more information about job management tools, see the
If you choose Printer's default, the job prints according to the settings specified in
Setup. For more information, see
If paper loaded in the selected tray is a different size, orientation, and/or media
N :
OTE
type than that of the job you are sending, the GA-1120 displays an error message and
the job will not print. You should then load the correct paper in the selected tray or
cancel the job.
If you specify incompatible print settings, the Conflict dialog box provides
N :
OTE
instructions to resolve the conflict.
10. From your application, click OK.
Select the GA-1120 as your current copier.
11. Click OK.
Some options listed in the printer driver could also be set from an application
N :
OTE
(for example, collation or Reverse Order). In these cases, use the driver option to
perform the function, rather than setting it from the application. The application may
not set up the file properly for printing on the GA-1120, which may cause an
unexpected printing error, and may also take longer to process.
Appendix
User Software Installation
Job Management
Appendix A.
A.
Guide.