Toshiba GA-1120 Printing Manual page 100

A
A-12 Print Options
Scale
The operator can specify a scaling override from Fiery Spooler or Fiery WebSpooler,
but the override is applied to any scaling value already set in the active job. For
example, if a user sends a job with a scaling value of 50% and the operator specifies a
Scale override of 200%, the job is printed at 100% of the original document size, that
is, 50% of 200%.
Sorter Mode
Sorting is supported on the copier with a sorter/stapler unit attached.
—Copies of a complete job are output, uncollated, into the Finisher tray.
Off
—Copies of a complete job are collated and output into the Finisher tray.
Collate
—Copies of a complete job are sorted and output into the Finisher tray, arranged
Sort
in page order.
—Copies of a complete job are output into the Finisher tray, with all copies of
Group
the same page grouped together in each separate bin.
The following table describes the interaction between Sorter, Collation, and Slip Sheet
settings.
Sorter Mode
Off
Collate
Sort
Group
Slip Sheet
On Uncollated sets (page numbers grouped together)
separated by slip sheets in one common bin
Off Uncollated sets (page numbers grouped together) in one
common bin
On Collated sets in slip sheets in one common tray
Off Collated sets in one common bin
Off Collated sets separated by slip sheets in one common tray
Off Uncollated sets (page numbers grouped together) in
separate bins
Result