Setting Up For Programmed Printing - Riso MZ970 User Manual

Advanced Features

Setting Up for Programmed Printing

Note:
• Both the Touch Screen and Print Quantity Keys (and related keys) may be used for this operation.
1
Press the
Note:
• Press the
"Single Page Mode". Press the
skip to step 3) of the "Multi-Page Mode".
• Alternatively, from the Master Making Basic
Screen, touch [Functions] then [Programme]
to display the Programme Type screen.
2
Touch the button of the programme
to set.
The input screen for that programme displays.
136 Automatic Sorting Into Groups [Programme]
key.
key and skip to step 3) of the
key and
3
Enter the numbers using the Print
Quantity Keys.
For Single Page Mode
1)
Enter the number of copies using the Print
Quantity Keys.
2)
Press the
3)
Enter the number of sets (in the group)
using the Print Quantity Keys.
4)
Press the
To programme more than one group, repeat
steps 1) - 4).
Note:
• Touch the desired input box. You can input
the page/set number with the Print Quantity
Keys.
• To cancel or change a number, press the
key and enter again.
• To clear all (number of copies and number of
sets), touch [Clear All].
• The total number of all copies to be printed is
shown on the top of the screen.
key or the key.
key or the key.