Riso MZ970 User Manual page 279

Troubleshooting
Message
Original Undetected
Reset Original
!! Outlines of Editing Areas
are Too Long !!
Divide Large Areas into
Several Smaller Areas and
Redo Colour Separation
Page Format is Larger
than Paper Size
!! Possible Ink Smudges
on Prints !!
Page Format is Larger
than Paper Size
!! Possible Ink Smudges
on Prints !!
(Continue->PROOF Key)
Printer Temperature is Low
"150ppm" is Not Available
Printing is Not Available
for This Paper Size with
Print Drum 2
Set Print Drum to be Used in
Drum Position 1 and
Re-select Printing Mode
276 When a Message Displays
Symptom
The machine failed to detect the original
document. The original document may
not be placed.
Selected area is larger than the print
paper size.
The printing paper is smaller than the
Master.
The printing paper is smaller than the
Master.
Current temperature is too low for
"150ppm" printing.
Drum 2 may be used for single colour
printing, but only on certain paper size.
Paper size currently loaded does not
support single colour printing with
Drum 2.
Action
Re-position the original to clear the Pop-
Up Message.
• When resuming the print job;
Touch [Continue].
(Alternatively, press the
• When stopping the print job;
Touch [Cancel].
(Alternatively, press the
the key to clear.)
Reduce the size, or select smaller
areas.
• To override the message and to print
with possible ink smears on the roller;
Touch [Continue].
(You can also print by pressing the
key or the
• When stopping the print job;
Touch [Cancel].
(You can also stop by pressing the
key or the key.)
Load the correct size printer paper.
• To override the message and to print
with possible ink smears on the roller;
Press the key.
• When stopping the print job;
Touch [Cancel].
(You can also stop by pressing the
key or the key.)
Load the correct size printer paper.
You may operate the machine with
regular speed by touching [Continue],
until temperature within the machine
reaches 15°C.
To return to Print Basic Screen, touch
[Cancel].
Touch [Close].
Remove Drum 2 from its current
position, and replace it in place of
Drum 1.
See p.14 for paper size limitation
when printing single colour using
Drum 2.
key to print.)
key or
key.)