Riso MZ970 User Manual page 60

2)
Touch [Easy 2Colour].
The Easy 2Colour screen appears.
3)
Touch the button of the separation to use.
Note:
• The part for which a master is being made
(either the "Outside of Area" or the "Inside
of Area") is displayed in the lower right sec-
tion of the screen at Drum 1 (
Drum 2 ( ).
Touch [Sw.Colour] to switch the colour
separations.
4)
Touch [OK].
The Functions screen appears.
3
Configure print functions.
Make various settings as needed.
For further information, see the section for each
print function.
If it is not displayed, press
Master Making Basic Screen.
4
Press the
A scan of the Area Specification Sheet begins.
) and
Once the scan has completed, the Master Making
Basic Screen appears. The original is next
scanned.
2-Colour Printing with 1 Original [Easy 2Colour]
Basic Operations
to display the
key.
57