Riso MZ970 User Manual page 239

When using a Linked Printer (sold separately)
Important!:
• This step is not necessary unless using the
ADF unit. Continue on to step 4.
Ready for Link Print
Duplex
LBP1
1 2
A4 A3
Basic
OFF
Page Total
4
Touch [OK].
Ready for Link Print
Duplex
LBP1
1 2
A4 A3
Basic
OFF
Page Total
Note:
• To cancel Duplex Printing, touch [OFF] then
[OK].
5
Place the original.
Note:
• For information about placing the original, see
step 5 in "2-Colour Printing with 2 Origi-
nals".( p.41)
• To scan a single sheet of an original, place it on
the Platen Glass.
• When Duplex Printing from odd number of orig-
inals scanned in the ADF unit, the reverse side
of the last page will be blank.
236 Duplex Printing [Duplex]
Cancel OK
Idle
A
MP
A B
B4
B
Selections Functions Admin.
Long Edge Short Edge
Even Odd
P.1/6
Cancel OK
Idle
A
MP
A B
B4
B
Selections Functions Admin.
Long Edge Short Edge
Even Odd
P.1/6
6
Select Print functions as needed.
The following functions are available:
• Image Processing mode ( p.70)
• Scanning Contrast ( p.77)
• Size ( p.78)
• Dot Process ( p.72)
• Memory ( p.150)
• Contrast Adj ( p.74)
• Tone Curve ( p.75)
• Book Shadow ( p.84)
• Top Margin ( p.104)
• Preview ( p.108)
• Overlay ( p.208)
• Storage Memory ( p.204)
7
Enter the number of copies using the
Print Quantity Keys.
The number is displayed on the Print Quantity Dis-
play.
Note:
• To change the number, press the
then re-enter the correct number.
8
Press the
The next steps are different, depending on
whether the original is scanned from Platen Glass,
or from the ADF unit.
Perform one of the following steps:
Important!:
• Either Platen Glass or ADF unit may be used,
but not both at a time.
key,
key.