909 CK14DD Instruction Manual page 26

firmly by pressing firmly on the spindle lock and rotating the
blade bolt in a clockwise direction.
Finally tighten the blade bolt using the hex key provided.
The direction in which the blade rotates has
WARNING.
to be the same as the direction of the arrow marked on the
housing.
Ensure that the spindle lock button (8) is released.
Before using the saw again, check that the safety devices
are in good working order. ie check the movement of the
rotating blade guard is not jamming and fully returns under
its own spring return when released.
After replacing the saw blade, make sure that
IMPORTANT.
the blade runs freely by turning it by hand.
Re-attach the battery and run the saw under no load
to check that it runs smoothly before using it to cut any
material.
26