CONTENTS Contents Warranty Power Tools Warranty For full details please visit us at www.909.com Introduction Environmental protection Description of symbols Specifications General safety rules Additional safety rules for demolition breakers Contents of carton Know your product Unpacking Fitting and removing accessories...
Conforms to relevant standards special care to heed the Cautions and Warnings. for electromagnetic compatibility. Your 909 power tool has many features that will make your job faster and easier. Safety, performance, and dependability have been given top priority in the For safe operation read instruction manual.
suitable for outdoor use reduces the risk of electric shock. General safety rules f) To reduce the risk of electric shock, the manufacturer WARNING. Read all safety warnings and all instructions. recommends the use of a residual current device Failure to follow the warnings and instructions may result in with a rated residual current of 30mA or less at electric shock, fire and/or serious injury.
4) Power tool use and care i) Children should be supervised to ensure that they do not play with the appliance. a) Do not force the power tool. Use the correct power tool for your application. The correct power tool will 5) Service do the job better and safer at the rate for which it was a) Have your power tool serviced by a qualified repair...
to these chemicals; work in a well ventilated area, and • Do not point the tool at any one in the area when work with approved safety equipment, such as those dust operating. The bit could fly out and injure someone masks that are specifically designed to filter out microscopic seriously.
Due to modern mass production techniques, it is unlikely accessories will not be covered under warranty. that your 909 Power Tool is faulty or that a part is missing. Auxiliary handle If you find anything wrong, do not operate the tool until the parts have been replaced or the fault has been rectified.
Note: 909 will not be responsible for any damage or injuries Maintenance caused by the repair of the tool by an unauthorised person • The grease in the gearbox or by mishandling of the tool.