Related Manuals for 909 ID182
Summary of Contents for 909 ID182
- Page 1 INSTRUCTION MANUAL ID182 IMPACT DRIVER/ WRENCH 9.5mm (3/8") SOCKET DRIVE 6.35mm (1/4") DRIVE ADAPTOR LITHIUM-ION...
-
Page 2: Table Of Contents
CONTENTS Warranty Power Tools Warranty For full details please visit us at www.909.com Description of symbols Specifications General safety rules Additional safety instructions for Impact Driver/Wrenches Additional safety instructions for the charger Additional safety instructions related to the battery pack and battery safety... -
Page 3: Description Of Symbols
Conforms to relevant standards special care to heed the Cautions and Warnings. for electromagnetic compatibility. Your 909 power tool has many features that will make Read these operating instructions well before your job faster and easier. Safety, performance, and dependability have been given top priority in the... -
Page 4: General Safety Rules
General safety rules e) When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord WARNING. Read all safety warnings and all instructions. suitable for outdoor use reduces the risk of electric shock. Failure to follow the warnings and instructions may result in 3) Personal safety electric shock, fire and/or serious injury. -
Page 5: Additional Safety Instructions For Impact Driver/Wrenches
4) Power tool use and care i) Children should be supervised to ensure that they do not play with the appliance. a) Do not force the power tool. Use the correct power tool for your application. The correct power tool will 5) Battery tool use and care do the job better and safer at the rate for which it was a) Ensure the switch is in the off position before... -
Page 6: Additional Safety Instructions For The Charger
If you are interrupted when operating the Impact Driver/ Wrench, complete the process and switch off before • Your 909 tool with Lithium Ion batteries may only looking up. be charged with the specific designed 909 Lithium Ion battery charger purchased with the tool. IT IS •... - Page 7 Use of any other cleaners is not recommended. • Do not plug anything other than your 909 tool into the • Do not place any object on to, or allow anything to rest charger, as other objects may touch dangerous voltage on the charger.
-
Page 8: Additional Safety Instructions Related To The Battery Pack And Battery Safety
• Do not dispose of the battery in a fire or put the battery • Use only the 909 batteries supplied with the 909 Tool or into a microwave oven, conventional oven, dryer, or high- 909-approved replacements. pressure container. -
Page 9: When To Charge The Battery
Unpacking Due to modern mass production techniques, it is unlikely that your 909 Power Tool is faulty or that a part is missing. If you find anything wrong, do not operate the tool until the parts have been replaced or the fault has been rectified. -
Page 10: Know Your Product
Know your product This Impact Driver/Wrench is mainly used for wrenching in wood or metal sheet and screwdriving. Use the tool and accessories only for intended applications. All other applications are expressly ruled out. 1. 3/8 inch (9.5mm) square drive 2. -
Page 11: Important Information - Product Care
drops below a pre set value. When this occurs the tool Important information – Product care will automatically stop operating. To correct the situation This wrench/driver uses lithium ion battery cells. Care you need to either insert another charged battery into the MUST be taken to ensure both the safety and life of the wrench or recharge the existing battery, and then proceed pack is maintained. -
Page 12: Battery Charging
The green light on the right Battery charging hand side of the base indicates IMPORTANT. Before attempting to charge the battery, that there is power to the check the charger, the charger base and the battery charger base. to ensure the charging equipment matches the battery 3. -
Page 13: Battery Indicator Under No-Load
Battery Indicator Under No-load Yellow Green Battery status indicator/description High: Battery is fully charged Medium: Battery has less than 50% charge capacity. Low: Battery has less than 30% charge capacity. Faulty battery pack High temperature. The battery pack temperature is too high and needs to be cooled down. -
Page 14: Using The Wrench
Using the wrench Impact driver attachment Trigger switch The ID182 is supplied with an impact driver attachment. This Use the forward/reverse switch allows the impact wrench to be (4) to select the direction of used as a impact driver where rotation, then pull the trigger standard 6.35mm (1/4 inch) screw... -
Page 15: Inserting A 3/8 Square Drive Socket
Inserting a 3/8 square drive socket Impact wrench safety features Select the socket which correctly Wrench Overload fits the nut or bolt being tighter or This wrench is fitted with an overload protection. If the removed. Ensure the socket is wrench is excessively forced, or the task being performed exactly the correct size. -
Page 16: Operating Tips
duration is by means of a trial. For small screws, the right Low voltage cut out impacting/tightening duration can be reached in less then The battery pack used on this tool is fitted with a low 0.5 Sec. Therefore, work with low RPM and switch the voltage cut out feature within the circuitry. -
Page 17: Maintenance
1. Clamp the pieces together and drill the first hole 2/3 the diameter of the screw. If the material is soft, drill only 2/3 the proper length. If it is hard, drill the entire length. 2. Unclamp the pieces and drill the second hole the same diameter as the screw shank in the first or top piece of wood.