Windsor CE26 Operating Instructions Manual
  1. Manuals
  2. Brands
  3. Windsor Manuals
  4. Floor Machine
  5. CE26
  6. Operating instructions manual

Windsor CE26 Operating Instructions Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Chariot 3 iExtract 26 Duo
Carpet Extractor
Operating Instructions (ENG)
Models:
From Serial Number (Ref No1*)
*See Serial Number Page
in Spare Parts List
or call manufacturer
CE26
1.006-167.0
CEC26
1.006-168.0
CEO26
1.006-178.0
CECO26
1.006-179.0
86398200-C
03/15/16

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CE26 and is the answer not in the manual?

Questions and answers

Related Manuals for Windsor CE26

Summary of Contents for Windsor CE26

  • Page 1 Chariot 3 iExtract 26 Duo Carpet Extractor Operating Instructions (ENG) Models: CE26 1.006-167.0 CEC26 1.006-168.0 CEO26 1.006-178.0 CECO26 1.006-179.0 From Serial Number (Ref No1*) *See Serial Number Page in Spare Parts List or call manufacturer 86398200-C 03/15/16...

  • Page 2: Machine Data Log/Overview

    Machine Data Log/Overview Overview The Chariot® iExtract® CE26 is a battery powered, self-propelled Carpet Extractor intended for commercial use. The machine is a dual mode; interim and deep extraction carpet machine. Interim mode applies solution at a low flow rate agitated by the counter-rotating brushes with no solution recovery. Deep extraction applies solution at a high flow rate agitated by counter-rotating brushes and recovered by the dual vacuum shoes.

  • Page 3: Table Of Contents

    Table of Contents Maintenance Machine Data Log/Overview....2 Service Schedule ......27 Table of Contents .

  • Page 4: How To Use This Manual

    How To Use This Manual This manual contains the following sections: The SAFETY section contains important information regarding hazardous or unsafe practices of the • How to Use This Manual machine. Levels of hazards are identified that could • Safety result in product damage, personal injury, or severe •...

  • Page 5: Safety

    Safety IMPORTANT SAFETY INSTRUCTIONS When using this machine, basic precaution must always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING THIS MACHINE. To reduce the risk of fire, electric shock, or injury: Use only indoors. Do not use outdoors or expose to rain. Use only as described in this manual.
  • Page 6 Safety MESURES DE SÉCURITÉ IMPORTANTES Lors de l'utilisation d'un appareil à batteries, il est nécessaire de respecter systématiquement des mesures de sécurité de base, comme suit: PRENEZ NOTE DE TOUTES CES MESURES AVANT D'UTILISER CETTE MACHINE. Pour réduire les risques d'incendie, de chocs électriques, ou de blessures: N'utiliser cette machine qu'en intérieur.

  • Page 7: Hazard Intensity Level

    Safety The following symbols are used throughout this guide as indicated in their descriptions: HAZARD INTENSITY LEVEL There are three levels of hazard intensity identified by signal words -WARNING and CAUTION and FOR SAFETY. The level of hazard intensity is determined by the following definitions: WARNING - Hazards or unsafe practices which COULD result in severe personal injury or death.
  • Page 8 Safety Les symboles ci-dessous sont utilisés à travers ce manuel comme illustré dans leurs descriptions: DEGRÉS DE RISQUES EN CAS DE DANGER Il existe trois degrés de risques identifiés par les termes signalétiques -AVERTISSEMENT et ATTENTION et POUR VOTRE SÉCURITÉ. Le degré de risque est défini de la manière suivante: AVERTISSEMENT - Dangers ou méthodes dangereuses qui POURRAIENT provoquer de graves blessures ou entraîner la mort.

  • Page 9: Safety Label Locations

    Safety Safety Label Locations These drawings indicate the location of safety labels on the machine. If at any time the labels become illegible, promptly replace them. EMPLACEMENT DE L'ÉTIQUETTE DE SÉCURITÉ REMARQUE : Ces dessins indiquent l'emplacement des étiquettes de sécurité sur la machine. Si, à tout moment, les étiquettes deviennent illisibles, contactez votre représentant autorisé...

  • Page 10: Operations

    Operations Technical Specifications ITEM DIMENSION/CAPACITY Nominal power 1944 W Rated Voltage 36 Volts DC Rated Amperage 54 amps Batteries 3 X12 Volt 205-234 AH @ 20 hr. rate Battery Compartment Dimensions 21 in. x 16 in. x 17 in. tall (533mm x 406mm x 432mm) Brush Motor .5 HP (373W) Vacuum Motors...
  • Page 11 Operations ITEM MEASURE Height 50.0 inches (1270 mm) Length 56.1 inches (1425 mm) Width 29.5 inches (749 mm) Width of scrub path 26 inches (660mm) This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

  • Page 12: How This Machine Works

    Operations How This Machine Works The function of the recovery system is to vacuum the soiled water back into the recovery tank. The recovery The Chariot® iExtract® 26 is a battery powered, self- system consists of two vacuum shoes, two vacuum propelled Carpet Extractor intended for commercial motors, float ball filter, and controls.

  • Page 13: Components

    Operations Components 7. Recovery Sight Dome 1. Control Panel - Drive 8. Solution Drain Hose 2. Control Panel - Scrub 9. Brush Deck 3. Console 10. Solution Supply 4. Pedal Platform 11. Recovery Lid 5. Rear Cover 12. Recovery Drain Hose 6.
  • Page 14 Operations 86398200 Operator Manual - Chariot 3 - iExtract 26 Duo...

  • Page 15: Drive Controls

    Operations Drive Controls 1. Key Switch 2. Emergency Stop/Brake Switch 3. Directional Control / Drive Reset Switch 4. Throttle Pedal 5. Horn Button 6. Steering Wheel 7. Speed Control 8. Battery Discharge Indicator 9. Hour Meter 1. KEY SWITCH Controls the power for machine functions. To turn the machine power on, rotate key clockwise.
  • Page 16 Operations 4. THROTTLE PEDAL Controls the speed of the vehicle within the speed control setting selected. Pressing the pedal causes the machine to travel in the direction selected by the Directional Control Switch. To increase speed, increase pressure on the pedal. To decrease speed, decrease pressure on the pedal.
  • Page 17 Operations 8. BATTERY CHARGE LEVEL INDICATOR Indicates the charge level of the batteries. The meter display is divided into 10 bars. Bars illuminated on the far right indicate full charge. Bars flashing near the left side indicate the batteries should be recharged. Further operation of the machine could damage the machine or the batteries.

  • Page 18: Scrub Controls

    Operations Scrub Controls 1. Function Mode Dial The first two positions are for transport only. See drive controls section. Interim Mode-Slow This mode is used for interim cleaning. In this mode the machine will propel at slow speed. The brush deck will automatically lower to contact the floor. The water will flow at a low rate set by the controller.
  • Page 19 Operations Deep Extraction-Fast This mode is used for deep carpet extraction. In this mode the machine will propel at fast speed. The brush deck will automatically lower to contact the floor. The vacuum shoes will automatically lower to the floor and the vacuum motors will turn on. The water will flow at a high rate.

  • Page 20: Pre-Run Machine Inspection

    Operations Machine Operation Filling Solution Tank FOR SAFETY: Before leaving or servicing machine; Pre-Run Machine Inspection stop on level surface, turn off machine and remove key. Do a pre-run inspection to find possible problems that could cause poor performance or lost time from break- 1.

  • Page 21: Normal Scrubbing

    Operations Normal Scrubbing If the machine is allowed to stand in neutral with the scrub deck down, the solutions flow stops and brush Plan the scrubbing pattern in advance. The longest motors stop. If either forward or reverse travel is track is around the perimeter of the area to be cleaned.

  • Page 22: To Begin Scrubbing

    Operations To Begin Scrubbing To Stop Scrubbing 1. Rotate the function knob to either transport posi- tion. The brush motor will stop and the scrub deck will rise to the park position. After 10 seconds the When operating the machine around people, pay vacuum shoe will raise, and 10 seconds later the close attention for unexpected movement.

  • Page 23: Emptying And Cleaning Tanks

    Operations Solution Tank 1. Remove the recovery tank lid. Recovery Tank 2. Pull the solution drain hose from its mounting pocket. Unscrew the cap, then lower hose in direc- tion of drain. 3. Remove the solution tank cap. 4. Flush the solution tank out with clean water and run several gallons of clean water through sys- tems.

  • Page 24: Vacuum Shoes

    Operations Vacuum Shoes 1. Vacuum Shoe Release The latch holds the vacuum shoe in place. 2. Vacuum Hoses and Y-Tube Vacuum shoe hose and y-tube carry the recovered solution to the recovery tank. 3. Vacuum Shoes Contact the carpet to recover solution. Vacuum Shoes The dual offset vacuum shoes are designed to remove soiled solution from the carpet.

  • Page 25: To Operate Off-Aisle Cleaning Option

    Operations To Operate Off-Aisle Cleaning Option b. Remove hose from right side vacuum shoe and connect to connection port towards center of 1. Turn Function Mode Dial to the Deep Extraction machine. Icon shown below to lower vacuum shoes. 5. Connect Off-Aisle Tool vacuum hose and Solution hose.

  • Page 26: 86398200 Operator Manual - Chariot 3 - Iextract 26 Duo

    Notes 86398200 Operator Manual - Chariot 3 - iExtract 26 Duo...

  • Page 27: Maintenance

    Maintenance Service Schedule BEFORE EACH AFTER EACH MAINTENANCE WORK PERIOD WORK PERIOD Check water level of batteries after charging; add distilled water if necessary. (Wet cell only) Check that recovery lid seals tightly. Visually check for damaged or worn wheels. Check brushes for proper installation.

  • Page 28: Batteries

    Maintenance Batteries 1. Rear Cover Latch 2. Rear Cover 3. Battery Connector-Machine 4. Battery Connector-Battery 5. Batteries 6. Battery Tray Liner 7. Battery Tray 86398200 Operator Manual - Chariot 3 - iExtract 26 Duo...

  • Page 29: Battery Maintenance

    Maintenance Batteries (Wet Cell Only) The batteries provide the power to operate the Wear eye protection and protective clothing when machine. The batteries require regular maintenance to working with batteries. keep them operating at peak efficiency. The machine batteries will hold their charge for long periods of time, but they can only be charged a certain number of times.

  • Page 30: Charging Batteries

    Maintenance Checking Battery Specific Gravity Charging Batteries Use a hydrometer to check the battery specific gravity. When servicing machine, avoid contact with battery acid. Lors de l'entretien de la machine, évitez tout contact avec l'acide de batterie. Batteries emit hydrogen gas. Explosion or fire can result.
  • Page 31 Maintenance Use a 36 volt, 20 amp maximum output DC charger FOR SAFETY: When charging, connect the charger which will automatically shut off when the batteries are to the batteries before connecting the charger to fully charged. the AC wall outlet. Never connect the charger to the AC wall outlet first.

  • Page 32: Changing Batteries

    Maintenance Changing Batteries Stop the machine in a clean area next to the charger. Turn off machine. FOR SAFETY: Before leaving or servicing the machine; stop on level surface, turn off machine and remove key. 1. Remove the rear cover. 2.

  • Page 33: Battery Charger Programming

    Maintenance Onboard Charger (Optional) Circuit Breaker must be off before unplugging batteries. Battery Charger Programming For machines equipped with optional on-board charger. When replacing batteries, charger programming changes may be required. If replacing batteries with same type, (e.g. maintenance free batteries with main- tenance free) no programming is required.

  • Page 34: Vacuum Shoes

    Maintenance WITH PUMP OFF-AISLE OPTION WITHOUT PUMP OFF-AISLE OPTION Vacuum Shoes 1. Vacuum Shoes 2. Vacuum Shoe Release 3. Vacuum Shoe Lift Actuator 86398200 Operator Manual - Chariot 3 - iExtract 26 Duo...

  • Page 35: Vacuum Shoes

    Maintenance Vacuum Shoes Vacuum Shoe Lift Actuator Removal/ Replacement The dual offset vacuum shoes are designed to extract soiled solution from the carpet. The plastic vacuum FOR SAFETY: Before leaving or servicing shoe glides minimize damage to carpet and flooring. machine, stop on a level surface and turn off the machine.
  • Page 36 Maintenance Brush Deck 1. Brush Deck 2. Brush Release Clips 3. Brush Motor 4. Brush Deck Lift Actuator 86398200 Operator Manual - Chariot 3 - iExtract 26 Duo...

  • Page 37: Scrub Brush Removal

    Maintenance Brush Deck The dual counter-rotating cylindrical brushes are designed to scrub and groom the carpet. Maintenance Scrub brushes should be inspected and cleaned daily. Scrub brushes should be exchanged front to back every 50 hours to ensure even wear. Scrub brushes should be replaced as a set when bristle length wears to the height of yellow PerformAlert bristles.

  • Page 38: Remove Brush Deck

    Maintenance Brush Deck Motor 1. Lower deck 2. Turn off machine Remove Brush Deck 3. Remove both halves of bumper 1. Remove both halves of bumper 4. Unplug actuator 2. Raise brush deck 5. Remove cotter pin and clevis pin at deck end of 3.

  • Page 39: Brush Motor Carbon Brush Replacement

    Maintenance Do not use a pressure washer to clean around the brush motors. Use tap pressure only. Brush Motor Carbon Brush Replacement . Scribe alignment mark on motor barrel to motor cap. Remove two bolts. 2. Remove end cap from motor. NOTE: NOTE: Motors contain two wave washers in cap.

  • Page 40: Solution

    Maintenance VIEW A SEE VIEW A Solution 1. Strainer 2. Solution Cap 3. Solenoid Valve 4. Manifold Quick Release 5. Manifold 6. Ball Valve 86398200 Operator Manual - Chariot 3 - iExtract 26 Duo...
  • Page 41 Maintenance Solution Strainer Located in bottom of tank. Protects system from debris. Solenoid Valve The solenoid valve is mounted on the back of the scrub deck, on left side. The solenoid valve opens and closes to meter the correct amount of solution to the scrub deck.

  • Page 42: Vacuum

    Maintenance Vacuum 1. Recovery Tank Float Shut-off 2. Vacuum Motors 3. Debris Bin 86398200 Operator Manual - Chariot 3 - iExtract 26 Duo...

  • Page 43: Recovery Tank Float Shut-Off

    Maintenance Recovery Tank Float Shut-off When water is no longer being vacuumed from the floor Vacuum Motor Carbon Brushes and the vacuum fan is operating, the ball float has engaged. The vacuum motor will not vacuum water End Cap with recovery tank full. The recovery tank must be drained.

  • Page 44: Drive Motor

    Maintenance Drive Motor 1. Drive Motor 2. Parking Brake 86398200 Operator Manual - Chariot 3 - iExtract 26 Duo...

  • Page 45: Electric Parking Brake Engagement

    Maintenance Electric Parking Brake Engagement Drive Motor Carbon Brush Replacement FOR SAFETY: Before leaving or servicing machine, stop on a level surface, turn off machine and remove key. Do not use a pressure washer to clean around the Electric Brake Engagement motors.

  • Page 46: Transporting

    Maintenance Transporting Preparation for Loading/Unloading Trailer Scrub head must be in the up position before loading. Pushing Machine When transporting the machine on a trailer or in a truck, The machine may be pushed for short distances at in addition to using tie-downs, be sure to set the parking speeds not to exceed 5 mph.

  • Page 47: Circuit Protection

    Maintenance Circuit Protection Circuit Breakers 1. MAIN CIRCUIT BREAKER Interrupts the flow of power from batteries in the event of an electrical overload. When the circuit breaker is tripped, it can be reset by pressing the toggle switch. If the circuit breaker continues to trip, the cause of the electrical overload must be corrected.

  • Page 48: Troubleshooting

    Maintenance Troubleshooting PROBLEM CAUSE SOLUTION No power to machine Battery disconnected Check all battery cable connections Emergency shut-off activated Reset Battery cables corroded Clean connections Faulty key switch Replace switch On board charger plugged in Unplug and stow cord Main circuit breaker tripped Reset circuit breaker Little or no propel Low battery charge...
  • Page 49 Maintenance PROBLEM CAUSE SOLUTION Vacuum motor does not run, or Faulty vacuum circuit or switch Check wires connections and motor runs slowly Worn vacuum motor brushes Replace brushes, check commutator Vacuum shoes will not go up/ Faulty circuit or actuator Check wires, connectors and actuator down Poor scrubbing performance...

  • Page 50: Controller Fault Codes

    Maintenance Controller Fault Codes ERROR CODE PROBLEM SOLUTION DELUXE THE BATTERY NEEDS CHARGING OR THERE IS A BAD TRACTION MOTOR AND CONNECTION FROM THE BATTERY TO THE TRACTION CONTROLLER ERROR CONTROLLER. CHARGE BATTERY OR CALL FOR SERVICE AND HAVE TECHNICIAN CHECK WIRING. TRACTION MOTOR THE TRACTION MOTOR HAS A BAD CONNECTION.
  • Page 51 Maintenance ERROR CODE PROBLEM SOLUTION DELUXE MACHINES WITH KÄRCHER FLEET SUPPORT, CALL FOR SERVICE. MACHINE IS NOT REPORTING MACHINES WITHOUT KÄRCHER FLEET SUPPORT, NO TO KÄRCHER FLEET ACTION REQUIRED 86398200 Operator Manual - Chariot 3 - iExtract 26 Duo...

  • Page 52: Suggested Spare Parts

    Suggested Spare Parts 86326980 CARBON BRUSH SET VACUUM MOTOR 86161800 LATCH 86353950 86370670 SOLUTION BASE, VACUUM SHOE DRAIN HOSE 86371770 O-RING 86343860 BELT 86370500 BRUSH 66132310 CARBON BRUSH SET DRIVE WHEEL MOTOR 86354270 RECOVERY DRAIN HOSE 86398200 Operator Manual - Chariot 3 - iExtract 26 Duo...
  • Page 53 86398200 Operator Manual - Chariot 3 - iExtract 26 Duo...

  • Page 55: Spare Parts List

    Spare Parts List (10061670, 10061680, 10061780, 10061790) Chariot 3 iExtract 26 Duo From Serial Number (Ref No. 1*) * See Serial Number page or call manufacturer. 86398210-P 12/31/16...
  • Page 56 How to Use this Spare Parts List The PARTS LIST section contains assembled parts illustrations and corresponding parts list. The parts lists include a number of columns of information: • REF – column refers to the reference number on the parts illustration. •...
  • Page 57 Table of Contents Options How to Use this Spare Parts List ....2 Onboard Charger ......90 Table of Contents .

  • Page 58: Brush Deck 1

    Brush Deck 1 86398210 Spare Parts List - Chariot 3 - iExtract 26 Duo...

  • Page 59: Brush Deck 2

    Brush Deck 1 SERIAL NO. PART NO. DESCRIPTION NOTES FROM 86373280 RAIL, AGITATOR 86372730 PLATE, BRUSH GUIDE 86372040 NUT, 5/16-18 HEX ACORN, SS ▲ 86371750 DRIVE, BRUSH DECK 86371510 COVER, END CAP, BRUSH CLIP 86370500 BRUSH, EXTRACTOR, 4” OD X 26” L 86374910 EXTRUSION, DUAL 4"...
  • Page 60 Brush Deck 2 86398210 Spare Parts List - Chariot 3 - iExtract 26 Duo...
  • Page 61 Brush Deck 2 SERIAL NO. PART NO. DESCRIPTION NOTES FROM 86372830 CLIP, MANIFOLD 86372680 BRACKET, SOLENOID 86372670 COVER SOLENOID 86371680 BRACKET, SHAFT COVER 86371580 BRACKET, HOSE 86370480 SLEEVE, 17 SH 4.09”, HYTREL, GRN 86370470 HUB, COUPLING, 18ES 1/2” D-BORE 86354990 CLAMP, .75 DIA, FLEX LOOP, NYLON 86340490 BRKT, MOTOR MOUNT...

  • Page 62: Brush Deck Lift

    Brush Deck Lift 86398210 Spare Parts List - Chariot 3 - iExtract 26 Duo...
  • Page 63 Brush Deck Lift SERIAL NO. PART NO. DESCRIPTION NOTES FROM 86005630 NUT HEX NYL LOC-THIN SS 3/8-16 86373170 SPRING, EXT .859OD X 5.75 L 86372220 BRACKET, LIFT, LOWER, FRONT 86377910 BRACKET ASM, ACTUATOR 86370420 WASHER, .257IDX.625ODX.125 NYL BLK 86370400 BRKT, ACTUATOR, UPPER, OUTER 86370390 BRKT, ACTUATOR, LOWER WLDMNT 86370360...

  • Page 64: Brush Deck Mounting

    Brush Deck Mounting 86398210 Spare Parts List - Chariot 3 - iExtract 26 Duo...
  • Page 65 Brush Deck Mounting SERIAL NO. PART NO. DESCRIPTION NOTES FROM 86370830 SCREW, 5/16-18 X 2.0, PNH, MS, SS 86370120 SPACER, .319DX.75DX.75L,AL 86368240 NUT,5/16-18,FLGNYLOCK,SS 86277410 SCREW, 5/16-18 X .625 CARR SS 86276070 SCREW, 5/16-18 X 3/4 CARRIAGE SS 86271840 NUT, 5/16-18 HEX NYLOCK THIN SS 86010670 WASHER, 5/16 FLAT SS 86277130...

  • Page 66: Brush Deck Drive

    Brush Deck Drive 86398210 Spare Parts List - Chariot 3 - iExtract 26 Duo...
  • Page 67 Brush Deck Drive SERIAL NO. PART NO. DESCRIPTION NOTES FROM 86370470 HUB, COUPLING, 18ES 1/2" D-BORE 86349800 SPACER, 15.9OD X 5.3ID X 11L 86349790 PLATE, SUPPORT 86343870 HOUSING ASM, BRUSH DRIVE 86343860 BELT, TWIN 5MM GT2, 15W, 130T 86343850 PULLEY, 32T 5MM GT, 15W 86343840 PULLEY, 18T 5MM GT, 15W 86343830...

  • Page 68: Bumper

    Bumper 86398210 Spare Parts List - Chariot 3 - iExtract 26 Duo...
  • Page 69 Bumper SERIAL NO. PART NO. DESCRIPTION NOTES FROM 86361960 SCR, 5/16-18 X 3.0 PTHMS SS 86361950 SCR, 5/16-18 X 2.0 PTHMS SS 86399650 BUMPER, LEFT, BLK 86399640 BUMPER, RIGHT, BLK 86276890 SCREW 5/16-18X3/4 PTHMS SS 86398210 Spare Parts List - Chariot 3 - iExtract 26 Duo...

  • Page 70: Console

    Console 86398210 Spare Parts List - Chariot 3 - iExtract 26 Duo...
  • Page 71 Console SERIAL NO. PART NO. QTY DESCRIPTION NOTES FROM 86005620 NUT, 1/4-20 X .962 WELL 86199840 FLOAT SCREEN CAGE ASSY (SLIP) 86272020 NUT, 8-32 HEXTHIN NYLOCK SS 86361770 WASHER, 1/4 SAE FLAT SS 86361760 SCREW, 1/4-20 X 1.25 CARRIAGE SS 86361410 GASKET, SIGHT GLASS DOME 86360770...

  • Page 72: Console Mounting

    Console Mounting 86398210 Spare Parts List - Chariot 3 - iExtract 26 Duo...
  • Page 73 Console Mounting SERIAL NO. PART NO. DESCRIPTION NOTES FROM 86360300 BRKT, CONSOLE MT LT 86276490 SCREW 5/16-18 X 5/8 HHCS SS 86010670 WASHER 5/16 FLAT SS 86360290 BRKT, CONSOLE MT RT 86367960 SCR, 5/16-18 X 1.38 HHCS SS 86367250 WASHER, .344ID X 1.13OD X .09T SS 86398210 Spare Parts List - Chariot 3 - iExtract 26 Duo...

  • Page 74: Control Panel - Upper

    Control Panel - Upper 86398210 Spare Parts List - Chariot 3 - iExtract 26 Duo...
  • Page 75 Control Panel - Upper SERIAL NO. PART NO. DESCRIPTION NOTES FROM 86362590 SWITCH, SPDT 3 POSN MOM, ARROW 86360690 PANEL, CONTROL UPPER, CS26 86358440 O-RING, 4MM ID, 1.5MM THK, BUNA-N 86358430 SCR, M4X12, FHMS, ISO7046, SS NP 86354870 SWITCH, ROTARY 86354810 GASKET, ROTARY SWITCH 86354560...

  • Page 76: Control Panel - Lower

    Control Panel - Lower 86398210 Spare Parts List - Chariot 3 - iExtract 26 Duo...
  • Page 77 SERIAL NO. PART NO. DESCRIPTION NOTES FROM 86401370 PANEL, CONTROLLER, CE26 86400700 PLATE, HEATSINK, CE26 86401380 PLATE, REAR CONSOLE, CE26 86361520 CLIP, CABLE ENTRY 86361420 HINGE, PANEL 86360890 GASKET, .188 X .31 X 23.6 86360880 COVER, CONTROL BOARD 86369020 BREAKER, 60A 2 - POLE...

  • Page 78: Control Panel - Lower With Off-Aisle - For Models 10061780 & 10061790

    Control Panel - Lower with Off-Aisle - For Models 10061780 & 10061790 86398210 Spare Parts List - Chariot 3 - iExtract 26 Duo...
  • Page 79 SERIAL NO. PART NO. DESCRIPTION NOTES FROM 86401370 PANEL, CONTROLLER, CE26 86400700 PLATE, HEATSINK, CE26 86401380 PLATE, REAR CONSOLE, CE26 86361520 CLIP, CABLE ENTRY 86361420 HINGE, PANEL 86360890 GASKET, .125 X .31 X 23.6 86360880 COVER, CONTROL BOARD 86369020 BREAKER, 60A 2 - POLE...

  • Page 80: Controls Panel Mounting

    Controls Panel Mounting 86398210 Spare Parts List - Chariot 3 - iExtract 26 Duo...
  • Page 81 Control Panel Mounting SERIAL NO. PART NO. DESCRIPTION NOTES FROM 86371410 SCR, 10-32 X .75 TMS SS BLK 86172980 SCR, KA50X10,PT OHS,WN1412,PLTD 86398210 Spare Parts List - Chariot 3 - iExtract 26 Duo...

  • Page 82: Controller

    Controller 86398210 Spare Parts List - Chariot 3 - iExtract 26 Duo...
  • Page 83 FROM CONTROLLER, I-DRV iEXTRACT 26, 36V, 86400170 (2*) 140A 86401450 BRACKET, CONTROLLER CE26 86361230 CLAMP, PAN 3/4" 86255900 STANDOFF, 6-32 X 5/8 HEX NYL * SEE SERIAL NUMBER PAGE 86398210 Spare Parts List - Chariot 3 - iExtract 26 Duo...

  • Page 84: Decals

    Decals 86398210 Spare Parts List - Chariot 3 - iExtract 26 Duo...
  • Page 85 DESCRIPTION NOTES FROM 86395480 LABEL, IEXTRACT 26, SIDE, LEFT 86395490 LABEL, IEXTRACT 26, SIDE, RIGHT 86362940 LABEL, BATTERY CABLING LABEL, WINDSOR KARCHER GROUP LOGO 86395400 DOMED 86395410 LABEL, CS26, CONTROL, LEFT 86395510 LABEL, CONTROL RIGHT IEXTRACT 26 OFF-AISLE 86395500 LABEL, OFF-AISLE, iEXTRACT 26...

  • Page 86: Drive Mounting

    Drive Mounting 86398210 Spare Parts List - Chariot 3 - iExtract 26 Duo...
  • Page 87 Drive Mounting SERIAL NO. PART NO. DESCRIPTION NOTES FROM 86366140 M10 X 25MM, FLANGE HH BOLT, GR 10.9 86366130 3/8-16 X 1, FLANGE HH BOLT, GR 8 86364130 ASM, SHAFT DRIVE MOTOR 86361070 BRKT, WIRING, DRIVE UNIT 86218360 GROMMET, 3/4 ID X 7/8 GROOVE 86357870 ASM, BEARING BLOCK, FRT DRIVE 86357120...

  • Page 88: Frame

    Frame 86398210 Spare Parts List - Chariot 3 - iExtract 26 Duo...
  • Page 89 Frame SERIAL NO. PART NO. DESCRIPTION NOTES FROM 86360820 ASSY, MAIN SUPPORT, CS26 86360710 ASM, WHEEL GUARD 86358190 GLIDE, BATTERY TRAY 86357950 PAD, TIP 86277410 SCR, 5/16-18 X 5/8 CARRIAGE SS 86276890 SCREW 5/16-18X3/4 PTHMS SS 86276490 SCREW 5/16-18 X 5/8 HHCS SS 86010670 WASHER 5/16 FLAT SS 86400810...

  • Page 90: Platform

    Platform 86398210 Spare Parts List - Chariot 3 - iExtract 26 Duo...
  • Page 91 Platform SERIAL NO. PART NO. DESCRIPTION NOTES FROM 86399670 PLATFORM, OPERATOR 86334240 PEDAL, HEEL, BLK 86334690 PEDAL, ACCELERATOR, YEL 86361170 PIN, DOWEL, .25D X 3.125", STEEL 86279170 WASHER, #10 X 1.0 FLAT 86172980 SCR, KA50X10,PT OHS,WN1412,PLTD 86254970 SPRING, COMP 18MMOD X 83 X 2 86327510 SCR, KA50 x 16, WN1412 A2 SS 86198440...

  • Page 92: Platform Footbox & Rear Wheels

    Platform Footbox & Rear Wheels 86398210 Spare Parts List - Chariot 3 - iExtract 26 Duo...
  • Page 93 Platform Footbox & Rear Wheels SERIAL NO. PART NO. DESCRIPTION NOTES FROM 86361130 PLATE, PLATFORM SUPPORT 86271840 NUT 5/16-18 HEX NYLOCK THIN SS 86361140 SPACER, 1.50 X .625OD X .065" WALL 86399620 FOOTBOX, OPERATOR PLATFORM 86361120 COLLAR, SHFT 1"ID X 1-5/8"OD X 5/8" 86357990 AXLE, REAR 86232130...

  • Page 94: Rear Cover

    Rear Cover 86398210 Spare Parts List - Chariot 3 - iExtract 26 Duo...
  • Page 95 Rear Cover SERIAL NO. PART NO. DESCRIPTION NOTES FROM 86277620 SCR, 8-32 X 1/2 HHCS SS 86161800 LATCH & CONCEALED KEEPER 86399960 PANEL, REAR COVER, BLK 86272020 NUT, 8-32 HEX THIN NYLOCK SS 86398210 Spare Parts List - Chariot 3 - iExtract 26 Duo...

  • Page 96: Recovery

    Recovery 86398210 Spare Parts List - Chariot 3 - iExtract 26 Duo...
  • Page 97 Recovery SERIAL NO. PART NO. DESCRIPTION NOTES FROM 86372060 BRACKET, Y TUBE 86372050 FITTING, PVC Y TUBE 1.25" 86372030 HOSE ASM, 1.5" BLK VAC 86372020 HOSE ASM, 1.5" BLK VAC 86273830 SCREW, 1/4-20 X .5 HHCS SS NP 86264940 CABLE TIE, 11.38" UL/CSA 86010630 WASHER, 1/4 ID X 5/8 OD SS 86002380...

  • Page 98: Solution System

    Solution System FOR WIRING HARNESS FOR WIRING HARNESS 86398210 Spare Parts List - Chariot 3 - iExtract 26 Duo...
  • Page 99 Solution System SERIAL NO. PART NO. DESCRIPTION NOTES FROM 86373000 MANIFOLD ASM, IEXTRACT 26 86134850 WASHER, SPRNG LK, M4, DIN127B,SST 86371880 SCREW, 1/4-20 x .75 THUMB SS 86371860 COUPLING, QD, 1/2 BARBED 86371850 COUPLING, QD, 3/8 NPT 86371840 VALVE, BALL, 3/8FPTx1/2BARB 86371830 ELBOW, 3/8MPT x 3/8MPT, 90 DEG, BRASS 86010670...

  • Page 100: Solution System - Pump - Off-Aisle - For Models 10061780 & 10061790

    Solution System - Pump - Off-Aisle - For Models 10061780 & 10061790 86398210 Spare Parts List - Chariot 3 - iExtract 26 Duo...
  • Page 101 Solution System - Pump - Off-Aisle - For Models 10061780 & 10061790 SERIAL NO. PART NO. DESCRIPTION NOTES FROM 86391430 WASHER, .683 X 1.35 X .06 SS 86391420 BRACKET, MOUNT, PUMP 86391410 PLENUM, VACUUM 86371850 COUPLING, QD, 3/8 NPT 86276070 SCR, 5/16-18 X 3/4 CARRIAGE SS 86270990 NUT, 10-32 HEX NYLOCK SS...

  • Page 102: Steering

    Steering 86398210 Spare Parts List - Chariot 3 - iExtract 26 Duo...
  • Page 103 Steering SERIAL NO. PART NO. DESCRIPTION NOTES FROM 86372950 BRKT, STEERING 86367250 WASHER, .344ID X 1.13OD X .09T SS 86278080 SCREW, 5/16-18 X 1.75 SCHSET SS 86361370 ASM, TENSIONER PLATE 86361210 SCREW, 3/8-16 X .625 SCHCS BLKOX 86358400 SHAFT, LOWER STEERING 2.1" 86358390 SHAFT, UPPER STEERING 9.1"...

  • Page 104: Tank

    Tank 86398210 Spare Parts List - Chariot 3 - iExtract 26 Duo...
  • Page 105 Tank SERIAL NO. PART NO. DESCRIPTION NOTES FROM 86367250 WASHER, .344IDX1.130ODX.09T SS 86366450 GASKET, SOLUTION FILL 86362380 ELBOW, PVC, 3/4M X SOC SCH 40 86361920 TUBE ASM, RECOVERY INLET 86361780 LANYARD, 12" SS 86361770 WASHER, 1/4 SAE FLAT SS 86361760 SCR, 1/4-20 X 1.25 CARRIAGE SS 86399770 TANK, GRAY, CS26...

  • Page 106: Vacuum Shoe Lift

    Vacuum Shoe Lift 86398210 Spare Parts List - Chariot 3 - iExtract 26 Duo...
  • Page 107 Vacuum Shoe Lift SERIAL NO. PART NO. DESCRIPTION NOTES FROM 86373600 SCREW, 5/16-18 X 2 HHMS SS 86372090 SPRING, EXT, 1.0 OD X 6.5L X .125W 86371660 BRKT, LIFT MOUNT 86371640 BRKT, ACTR MT, REAR 86371630 BRKT, ACTR MT, FRT 86371620 PLATE, LIFT LINK 86371610...

  • Page 108: Vacuum Shoe Mounting

    Vacuum Shoe Mounting 86398210 Spare Parts List - Chariot 3 - iExtract 26 Duo...
  • Page 109 Vacuum Shoe Mounting SERIAL NO. PART NO. DESCRIPTION NOTES FROM 86374370 PIN, CLEVIS 1/4 X .5 SS 86373620 SHOULDER BOLT, 1/4 X .5L SS 86371820 BRKT, VAC SHOE LATCH 86371810 BRKT, VAC SHOE MOUNT 86346600 SPACER, .320 OD x .257 ID x .505L NY 86279380 WASHER, 1/2 X 1 X .08 NYL 86276860...

  • Page 110: Vacuum Shoe

    Vacuum Shoe 86398210 Spare Parts List - Chariot 3 - iExtract 26 Duo...
  • Page 111 Vacuum Shoe SERIAL NO. PART NO. DESCRIPTION NOTES FROM 86371770 O-RING, 3/16 DIA X 9.5 DIA FOAM 86371670 LATCH, VAC SHOE 86370760 BRACKET, VAC SHOE 86370680 COVER, VACUUM SHOE 86370670 BASE, VACUUM SHOE 86347910 SPACER. FLG .375ID x .44OD, NYL 86373650 SPACER, .192 X .500 X .188, NYL 86327510...

  • Page 112: Vacuum

    Vacuum 86398210 Spare Parts List - Chariot 3 - iExtract 26 Duo...
  • Page 113 Vacuum SERIAL NO. PART NO. DESCRIPTION NOTES FROM 86371470 HOSE ASM, 1.5 x 34.0 86371460 HOSE, 1.5" x 30", 4:1 STRETCH 86369990 MOUNT, DUAL VAC MOTOR 86323300 WASHER, 1/4" RUBBER 86312920 GASKET, VAC MOTOR 86276720 SCREW, 1/4-20 X 4.25 HHCS PLTD 86273810 SCREW, 1/4-20 X 1 HHCS SS 86005680...

  • Page 114: Wiring - Batteries

    Wiring - Batteries 86398210 Spare Parts List - Chariot 3 - iExtract 26 Duo...
  • Page 115 Wiring - Batteries SERIAL NO. PART NO. DESCRIPTION NOTES FROM 86283410 BATTERY, 12V, 225AH 86228430 BATTERY, 12V AGM 234AH 86228410 BATTERY, 12V, 205AH (J185P-AC) 86273980 SCR, 10-32 X 3/4 PPHMS SS 86271910 NUT, 5/16-18 FLEXLOCK 86270890 NUT, 10-32 HEX ACORN 86264960 CABLE TIE, .375 X 43 86260610...

  • Page 116: Wiring - Components

    Wiring - Components 86398210 Spare Parts List - Chariot 3 - iExtract 26 Duo...
  • Page 117 Wiring - Components SERIAL NO. PART NO. DESCRIPTION NOTES FROM 86361230 CLAMP, PAN 3/4" 86198460 CLAMP, 5/8 NYLON UL/CSA 86326270 CLAMP, 1.5 DIA 86264940 CABLE TIE 11.38" UL/CSA 86239720 HORN, 108DB MINATURE W/RING 86238500 GROMMET,1.703IDX2.5.ODX.125GRV 86238430 GROMMET 1.00 ID 3/16 GRIP 86006980 SCREW, 10-32 X .5 HHCS SS 86372260...

  • Page 118: Wiring 1 - From Serial Number (3*)

    Wiring 1 - From Serial Number (3*) 86398210 Spare Parts List - Chariot 3 - iExtract 26 Duo...
  • Page 119 Wiring 1 - From Serial Number (3*) SERIAL NO. PART NO. DESCRIPTION NOTES FROM 86414330 HARNESS, PANEL, CE26 W/TELEMATICS 86366540 HARNESS, ROTARY, MAIN, CS26 86367100 LED, WATER INDICATOR 86398210 Spare Parts List - Chariot 3 - iExtract 26 Duo...

  • Page 120: Wiring 2 - From Serial Number (3*)

    Wiring 2 - From Serial Number (3*) 86398210 Spare Parts List - Chariot 3 - iExtract 26 Duo...
  • Page 121 HARNESS, PUMP, OFF-AISLE, 86391740 OPTION iEXTRACT26 HARNESS, RELAY/SWITCH, O-A, 86391730 OPTION iEXTRACT26 86401510 CABLE, CTRLR BATTERY POS, CE26 PART OF 86414330 86401520 CABLE, CTRLR BATTERY NEG, CE26 PART OF 86414330 86399880 HARNESS, EXTENSION CE26 86414320 HARNESS, MAIN, CE26 W/TELEMATICS NOT SHOWN...

  • Page 122: Wiring 3 - From Serial Number (3*)

    Wiring 3 - From Serial Number (3*) 86398210 Spare Parts List - Chariot 3 - iExtract 26 Duo...
  • Page 123 Wiring 3 - From Serial Number (3*) SERIAL NO. PART NO. QTY DESCRIPTION NOTES FROM 86413590 HARNESS, TCU DESCRIPTION IDRIVE CONTROL CPU CONTROL TCU CONTROL G1-G3 BATTERY 12V VACUUM MOTOR VACUUM MOTOR TRACTION MOTOR BRUSH MOTOR DECK ACTUATOR VACUUM ACTUATOR E STOP KEY SWITCH F/R SWITCH...

  • Page 124: Wiring 4 - From Serial Number (3*)

    Wiring 4 - From Serial Number (3*) 86398210 Spare Parts List - Chariot 3 - iExtract 26 Duo...
  • Page 125 Wiring 4 - From Serial Number (3*) DESCRIPTION IDRIVE CONTROL CPU CONTROL TCU CONTROL G1-G3 BATTERY 12V VACUUM MOTOR VACUUM MOTOR TRACTION MOTOR BRUSH MOTOR DECK ACTUATOR VACUUM ACTUATOR E STOP KEY SWITCH F/R SWITCH PLATFORM SWITCH WATER SWITCH HORN SWITCH OFF/AISLE TOOL SWITCH MAIN ROTARY OFF/AISLE TOOL RELAY...

  • Page 126: Wiring 5 - From Serial Number (3*)

    Wiring 5 - From Serial Number (3*) 86398210 Spare Parts List - Chariot 3 - iExtract 26 Duo...
  • Page 127 Wiring 5 - From Serial Number (3*) DESCRIPTION IDRIVE CONTROL CPU CONTROL TCU CONTROL G1-G3 BATTERY 12V VACUUM MOTOR VACUUM MOTOR TRACTION MOTOR BRUSH MOTOR DECK ACTUATOR VACUUM ACTUATOR E STOP KEY SWITCH F/R SWITCH PLATFORM SWITCH WATER SWITCH HORN SWITCH OFF/AISLE TOOL SWITCH MAIN ROTARY OFF/AISLE TOOL RELAY...

  • Page 128: Wiring 6 - From Serial Number (3*)

    Wiring 6 - From Serial Number (3*) 86398210 Spare Parts List - Chariot 3 - iExtract 26 Duo...
  • Page 129 Wiring 6 - From Serial Number (3*) DESCRIPTION IDRIVE CONTROL CPU CONTROL TCU CONTROL G1-G3 BATTERY 12V VACUUM MOTOR VACUUM MOTOR TRACTION MOTOR BRUSH MOTOR DECK ACTUATOR VACUUM ACTUATOR E STOP KEY SWITCH F/R SWITCH PLATFORM SWITCH WATER SWITCH HORN SWITCH OFF/AISLE TOOL SWITCH MAIN ROTARY OFF/AISLE TOOL RELAY...

  • Page 130: Wiring 1 - Prior To Serial Number (3*)

    Wiring 1 - Prior to Serial Number (3*) 86398210 Spare Parts List - Chariot 3 - iExtract 26 Duo...
  • Page 131 Wiring 1 - Prior to Serial Number (3*) SERIAL NO. PART NO. DESCRIPTION NOTES FROM 86402050 HARNESS, PANEL, CE26 86366540 HARNESS, ROTARY, MAIN, CS26 86367100 LED, WATER INDICATOR 86398210 Spare Parts List - Chariot 3 - iExtract 26 Duo...

  • Page 132: Wiring 2 - Prior To Serial Number (3*)

    Wiring 2 - Prior to Serial Number (3*) 86398210 Spare Parts List - Chariot 3 - iExtract 26 Duo...
  • Page 133 HARNESS, PUMP, OFF-AISLE, 86391740 OPTION iEXTRACT26 HARNESS, RELAY/SWITCH, O-A, 86391730 OPTION iEXTRACT26 86401510 CABLE, CTRLR BATTERY POS, CE26 PART OF 86402050 86401520 CABLE, CTRLR BATTERY NEG, CE26 PART OF 86402050 86399880 HARNESS, EXTENSION CE26 86372590 HARNESS, MAIN, IEXTRACT 26 NOT SHOWN...

  • Page 134: Wiring 3 - Prior To Serial Number (3*)

    Wiring 3 - Prior to Serial Number (3*) 86398210 Spare Parts List - Chariot 3 - iExtract 26 Duo...
  • Page 135 Wiring 3 - Prior to Serial Number (3*) DESCRIPTION IDRIVE CONTROL CPU CONTROL G1-G3 BATTERY 12V VACUUM MOTOR VACUUM MOTOR TRACTION MOTOR BRUSH MOTOR DECK ACTUATOR VACUUM ACTUATOR E STOP KEY SWITCH F/R SWITCH PLATFORM SWITCH WATER SWITCH HORN SWITCH OFF/AISLE TOOL SWITCH MAIN ROTARY OFF/AISLE TOOL RELAY...

  • Page 136: Wiring 4 - Prior To Serial Number (3*)

    Wiring 4 - Prior to Serial Number (3*) 86398210 Spare Parts List - Chariot 3 - iExtract 26 Duo...
  • Page 137 Wiring 4 - Prior to Serial Number (3*) DESCRIPTION IDRIVE CONTROL CPU CONTROL G1-G3 BATTERY 12V VACUUM MOTOR VACUUM MOTOR TRACTION MOTOR BRUSH MOTOR DECK ACTUATOR VACUUM ACTUATOR E STOP KEY SWITCH F/R SWITCH PLATFORM SWITCH WATER SWITCH HORN SWITCH OFF/AISLE TOOL SWITCH MAIN ROTARY OFF/AISLE TOOL RELAY...

  • Page 138: Wiring 5 - Prior To Serial Number (3*)

    Wiring 5 - Prior to Serial Number (3*) 86398210 Spare Parts List - Chariot 3 - iExtract 26 Duo...
  • Page 139 Wiring 5 - Prior to Serial Number (3*) DESCRIPTION IDRIVE CONTROL CPU CONTROL G1-G3 BATTERY 12V VACUUM MOTOR VACUUM MOTOR TRACTION MOTOR BRUSH MOTOR DECK ACTUATOR VACUUM ACTUATOR E STOP KEY SWITCH F/R SWITCH PLATFORM SWITCH WATER SWITCH HORN SWITCH OFF/AISLE TOOL SWITCH MAIN ROTARY OFF/AISLE TOOL RELAY...

  • Page 140: Wiring 6 - Prior To Serial Number (3*)

    Wiring 6 - Prior to Serial Number (3*) 86398210 Spare Parts List - Chariot 3 - iExtract 26 Duo...
  • Page 141 Wiring 6 - Prior to Serial Number (3*) DESCRIPTION IDRIVE CONTROL CPU CONTROL G1-G3 BATTERY 12V VACUUM MOTOR VACUUM MOTOR TRACTION MOTOR BRUSH MOTOR DECK ACTUATOR VACUUM ACTUATOR E STOP KEY SWITCH F/R SWITCH PLATFORM SWITCH WATER SWITCH HORN SWITCH OFF/AISLE TOOL SWITCH MAIN ROTARY OFF/AISLE TOOL RELAY...
  • Page 142 Notes: 86398210 Spare Parts List - Chariot 3 - iExtract 26 Duo...
  • Page 143 Options OPTIONS...

  • Page 144: Onboard Charger

    Onboard Charger TO ON-BOARD CHARGER SEE TOP VIEW A TOP VIEW A SCALE 4X 86398210 Spare Parts List - Chariot 3 - iExtract 26 Duo...
  • Page 145 NOTES FROM 86414900 CHARGER, SPE 36V 25A CBHF2-PFC *(4) 86371500 GASKET, .188 X .31 X 36.0 86400190 PLATE, OBC, CE26 86371490 PAD, CONSOLE IEXTRACT 26 86255910 STANDOFF, 1/4-20 X 1.0 HEX INS 86006850 SET SCREWS, 1/4-20X 1.25L 86005710 NUT, 1/4-20 HEX W/STAR WASHER 86366080 STANDOFF, 10-32 X 1.0 NYL...

  • Page 146: Battery Exchange - 1

    Battery Exchange - 1 DETAIL A SEE DETAIL A 86398210 Spare Parts List - Chariot 3 - iExtract 26 Duo...

  • Page 147: Battery Exchange - 2

    Battery Exchange - 1 SERIAL NO. PART NO. DESCRIPTION NOTES FROM 86359450 BRACKET, SPRING COVER, CART 86359400 BRKT, TRAY CATCH 86359390 BRACKET, BACK, CART 86359380 ASM, FRAME, BATTERY CART 86358190 GLIDE, BATTERY TRAY 86277470 SCR, 5/16-18 X 1.5 CARRIAGE SS 86276790 SCR, 5/16-18 X 1.75 HHCS SS 86276710...

  • Page 148: Battery Exchange - 3

    Battery Exchange - 2 86398210 Spare Parts List - Chariot 3 - iExtract 26 Duo...
  • Page 149 Battery Exchange - 2 SERIAL NO. PART NO. DESCRIPTION NOTES FROM 86359440 BRACKET, PEDAL, CART 86359430 PLATE, LATCH LINK, CART 86359420 PLATE, PEDAL LINK, CART 86359410 PLATE, LATCH, CART 86277470 SCR, 5/16-18 X 1.5 CARRIAGE SS 86276070 SCR, 5/16-18 X 3/4 CARRIAGE SS 86270830 NUT, 5/16-18 HEX NYLOCK SS 86259420...
  • Page 150 Battery Exchange - 3 2X EXISTING NUTS 10 (LEFT) 11 (RIGHT) 1 (LEFT) 2 (RIGHT) 86398210 Spare Parts List - Chariot 3 - iExtract 26 Duo...
  • Page 151 Battery Exchange - 3 SERIAL NO. PART NO. DESCRIPTION NOTES FROM 86360040 BATTERY STOP, LEFT 86360050 BATTERY STOP, RIGHT 86319670 SLEEVE, BEARING 86363760 PLATE, SHIM .030" THIC 86010670 WASHER 5/16 FLAT SS 86007020 SCREW, 5/16-18 X 1.25 HHCS SS NP 86279190 WASHER, 10 FLT TYPEB FLT ZNPLT 86360090...

  • Page 152: Pump - Off-Aisle - For Models 10061670 & 10061680

    Pump - Off-Aisle - For Models 10061670 & 10061680 86398210 Spare Parts List - Chariot 3 - iExtract 26 Duo...
  • Page 153 Pump - Off-Aisle - For Models 10061670 & 10061680 SERIAL NO. PART NO. DESCRIPTION NOTES FROM 86391430 WASHER, .683 X 1.35 X .06 SS 86391420 BRACKET, MOUNT, PUMP 86391410 PLENUM, VACUUM 86371850 COUPLING, QD, 3/8 NPT 86276070 SCR, 5/16-18 X 3/4 CARRIAGE SS 86270990 NUT, 10-32 HEX NYLOCK SS 86368240...

  • Page 154: Serial Numbers

    Serial Numbers REF. MODEL: SERIAL # 10061670000260, 10061680000242, 10061780000001, 10061790000008 10061670000330, 10061680000307, 10061780000002, 10061790000014 10061670000385, 10061680000348, 10061780000008, 10061790000022 RESERVED 86398210 Spare Parts List - Chariot 3 - iExtract 26 Duo...

  • Page 155: Notes

    Notes 86398210 Spare Parts List - Chariot 3 - iExtract 26 Duo...

This manual is also suitable for:

1.006-167.0Cec261.006-178.0Ceco261.006-179.01.006-168.0 ... Show all

Table of Contents