Windsor CE26 Operating Instructions Manual page 19

2. Solution Button and Indicator
The button enables and disables solution flow. When the green indicator is illuminated, solution flow is
enabled.
Deep Extraction-Fast
This mode is used for deep carpet extraction. In this mode the machine will propel at fast
speed. The brush deck will automatically lower to contact the floor. The vacuum shoes will
automatically lower to the floor and the vacuum motors will turn on. The water will flow at a
high rate. Water will automatically shut off in neutral and resume as machine propels
forward. The vacuum shoes will lift off the floor in reverse with the vacuum motors having
a delayed shut off to clear the hoses.
Vacuum Only Mode
This mode is used for solution recovery. In this mode the machine will propel at fast speed.
The brush deck will be up and the motor off. There will be no solution flow in this mode.
The vacuum shoes will automatically lower to the floor and the vacuum motors will turn on.
The vacuum shoes will lift off the floor in reverse with the vacuum motors having a delayed
shut off to clear the hoses.
Off-Aisle Tool Mode (Wand/Hand Tool)
This mode is used for Off-Aisle tool use. The dial is set in the same position as the
Vacuum Only Mode. Once the Off-Aisle tool button on the lower control panel is pushed,
the machine will not propel. The vacuum motors and pump will come on and solution will
flow.
Brush Only Mode
This mode is used for carpet agitation. In this mode the machine will propel at fast speed.
The brush deck will automatically lower to contact the floor. There will be no solution flow
in this mode. The vacuum shoes will remain off the floor and the vacuum motors will be off
in this mode.
86398200 Operator Manual - Chariot 3 - iExtract 26 Duo
Operations
19