Scrub Controls - Windsor CE26 Operating Instructions Manual

Operations

Scrub Controls

1. Function Mode Dial
The first two positions are for transport only. See drive controls section.
Interim Mode-Slow
This mode is used for interim cleaning. In this mode the machine will propel at slow speed.
The brush deck will automatically lower to contact the floor. The water will flow at a low rate
set by the controller. Water will automatically shut off in neutral and resume as machine
propels forward. The vacuum shoes will remain off the floor and the vacuum motors will be
off in this mode.
Interim Mode-Fast
This mode is used for interim cleaning. In this mode the machine will propel at fast speed.
The brush deck will automatically lower to contact the floor. The water will flow at a low rate
set by the controller. Water will automatically shut off in neutral and resume as machine
propels forward. The vacuum shoes will remain off the floor and the vacuum motors will be
off in this mode.
Deep Extraction-Slow
This mode is used for deep carpet extraction. In this mode the machine will propel at slow
speed. The brush deck will automatically lower to contact the floor. The vacuum shoes will
automatically lower to the floor and the vacuum motors will turn on. The water will flow at a
high rate. Water will automatically shut off in neutral and resume as machine propels
forward. The vacuum shoes will lift off the floor in reverse with the vacuum motors having a
delayed shut off to clear the hoses.
18 86398200 Operator Manual - Chariot 3 - iExtract 26 Duo
2
1