To Begin Scrubbing; To Stop Scrubbing - Windsor CE26 Operating Instructions Manual

Operations

To Begin Scrubbing

When operating the machine around people, pay
close attention for unexpected movement. Use
extra caution around children.
Lorsque vous utilisez la machine en présence de
gens, portez une attention particulière aux mouve-
ments inattendus. Soyez plus prudent, surtout en
présence d'enfants.
Flammable liquids and/or reactive metals can
cause explosions or fire! Do not pick up.
Les liquides inflammables et / ou les métaux
réactifs peuvent provoquer des explosions ou un
incendie! Ne les ramassez pas.
1. Stand on the operator platform. Throttle pedal must
be in neutral position.
2. Turn machine power on.
3. Press the Drive Reset / Directional Control Switch,
selecting the desired travel direction.
4. Position the function control knob to the desired
operation. The scrub deck and vacuum shoes will
lower, and the vacuum will turn on.
5. Drive machine forward to begin scrubbing. The
scrub brush motor will run and solution will flow
when the throttle is depressed.
NOTE: Shut machine off immediately if water or foam
is expelled from the machine.
NOTE: Solution flow is automatically shut off when
brush motor stops. When brush motor is activated,
flow automatically resumes.
22 86398200 Operator Manual - Chariot 3 - iExtract 26 Duo

To Stop Scrubbing

1. Rotate the function knob to either transport posi-
tion. The brush motor will stop and the scrub deck
will rise to the park position. After 10 seconds the
vacuum shoe will raise, and 10 seconds later the
vacuum motor will turn off. This delay is to clear the
vacuum hose of recovered solution.
2. Allow the throttle pedal to return to neutral.
3. Turn machine power off.
FOR SAFETY: Before leaving or servicing
machine: stop on level surface, turn off machine
and remove key.