Siemens SIMATIC IPC627D Operating Manual page 19

Parameter
WLAN
Cardbus + SD-Card
Touchpad
Only with IPC2x7
1
Depending on the ordered device configuration
2
Only available if an Azalia HD audio controller is installed.
3
Only with IPC6x7 and IPC8x7
4
Only with Field programming device
5
Not with Field programming device
6
Only if approved
7
"SATA / IDE Configuration" submenu
BIOS Description
Operating Manual, 05/2016, A5E33664825-AB
Meaning
Enabled
5
Last State
Disabled
The storage device is switched on (Enabled) or switched off (Disabled).
5
The touchpad is switched on (Enabled) or switched off (Disabled).
5
The WLAN transceiver is always switched on after
the power-up.
After the power-up the WLAN transceiver again
assumes the status it had before the last
shut-down.
The WLAN transceiver is always switched off after
the power-up.
BIOS Setup (SCU)
3.4 Advanced menu
19