Table of Contents
Advertisement
Remove packaging
Check that the stove is not damaged before installing it.
Scan 1002 is delivered secured to the pallet. It is recommended that
you remove the door and take all loose parts out of the combustion
chamber before unscrewing the stove from the pallet; this will facili-
tate the mounting of the insert.
Dismount the combustion air box. This box is only needed, if the insert
is to be connected with external air supply, see page 19.
To remove the door:
Loosen the pointed screw, remove the screw and the spring and lift
off the door
B
Scan 1001
Ovn på palle
AVN:
EMNE:
ATERIALE:
B
IMENSION:
C:\Working Folder\Designs\Scan 1001\91001002.idw
TI:
Scan 1001
NAVN:
EMNE:
MATERIALE:
DIMENSION:
N/A
VÆGT:
DATO:
N/A
AREAL:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
Pointed screw
Afmontage låge
N/A
DATO:
VÆGT:
N/A
AREAL:
A S S E M B LY
Dismount the connecting piece.
Loosen (not dismount) the flange nuts holding the connecting piece
inside the stove. Push the connecting piece in the direction of the
arrow and remove it.
Combustion air box
Pull the insert out of the cassette.
Scan 1001
NAVN:
MATERIALE:
DIMENSION:
C:\Working Folder\Designs\Scan 1001\91001007.idw
STI:
Remove the two screws securing the cassette to the pallet.
91001002
TG.NR:
28-03-12
BC
SIGN:
Scan 1001
NAVN:
MATERIALE:
DIMENSION:
C:\Working Folder\Designs\Scan 1001\91001008.idw
STI:
C
Screw and
spring
TG.NR:
91001003
BC
28-03-12
SIGN:
NAVN:
Krog Iversen & Co A/S
MATERIALE:
Afmontage røgstuds
EMNE:
N/A
VÆGT:
N/A
AREAL:
C
Afmontage ovn fra svøb
EMNE:
N/A
VÆGT:
N/A
AREAL:
Screws to be removed
EMNE:
N/A
VÆGT:
7
91001007
TG.NR:
17-04-12
BC
DATO:
SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
91001008
TG.NR:
BC
DATO:
17-04-2012
SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
11001900-Manual
TG.NR:
27-03-12
BC
DATO:
SIGN:
Advertisement
Table of Contents
