Ozito RTR-040U Additonal Operating & Safety Instructions

Service information

We have competent service partners in all countries named on the guarantee certifi cate whose contact
details can also be found on the guarantee certifi cate. These partners will help you with all service re-
quests such as repairs, spare and wearing part orders or the purchase of consumables.
Please note that the following parts of this product are subject to normal or natural wear and that the
following parts are therefore also required for use as consumables.
Category
Wear parts* Carbon brushes, clamping spindles, arbors,
sleeves, flexible shafts
Consumables* grinding wheels, grinding/sanding belts, cutters
(routers), felt polishers, drill bits, grinding pins,
cutting-off wheels, grinding heads, wire brushes
Missing parts
* Not necessarily included in the scope of delivery!
In the eff ect of defects or faults, please register the problem on the internet at www.isc-gmbh.info.
Please ensure that you provide a precise description of the problem and answer the following questions
in all cases:
•
Did the equipment work at all or was it defective from the beginning?
•
Did you notice anything (symptom or defect) prior to the failure?
•
What malfunction does the equipment have in your opinion (main symptom)?
Describe this malfunction.

Declaration of confirmity

ISC GmbH · Eschenstraße 6 · D-94405 Landau/Isar
explains the following conformity according to EU directives and norms for
the following product
Example
2014/29/EU
2005/32/EC_2009/125/EC
2014/35/EU
2006/28/EC
X 2014/30/EU
2014/32/EU
2014/53/EC
2014/68/EU
90/396/EC_2009/142/EC
89/686/EC_96/58/EC
X 2011/65/EU
Standard references: EN 60745-1; EN 60745-2-1; EN 60745-2-23;
Landau/Isar, den 05.07.2016
First CE: 16
Art.-No.: 44.722.59 I.-No.: 11016
Subject to change without notice
Rotary Tool RTR-040U (Ozito)
X 2006/42/EC
Annex IV
Notifi ed Body:
Notifi ed Body No.:
Reg. No.:
2000/14/EC_2005/88/EC
Annex V
Annex VI
Noise: measured L = dB (A); guaranteed L = dB (A)
WA WA
P = KW; L/Ø = cm
Notifi ed Body:
2012/46/EU
Emission No.:
EN 55014-1; EN 55014-2; EN 61000-3-2; EN 61000-3-3
Weichselgartner/General-Manager Yang/Product-Management
Archive-File/Record: NAPR014352
Documents registrar: R. Gehard
Wiesenweg 22, D-94405 Landau/Isar
- 135 -
size 445 x 210 mm
GB Additonal operating & safety instructions Rotary Tool
Danger! - Read the operating instructions to Caution! Wear safety goggles. Sparks gene-
reduce the risk of inquiry rated during working or splinters, chips and dust
emitted by the device can cause loss of sight.
Caution! Wear ear-muffs. The impact of noise
The reprinting or reproduction by any other me-
can cause damage to hearing.
ans, in whole or in part, of documentation and
papers accompanying products is permitted only
with the express consent of the iSC GmbH.
Subject to technical changes
Caution! Wear a breathing mask. Dust which
is injurious to health can be generated when
working on wood and other materials. Never use
the device to work on any materials containing
asbestos!
RTR-040U