Ozito DPI-6000 Instruction Manual

Ozito DPI-6000 Instruction Manual

Dual power inflator

Advertisement

DUAL POWER
INFLATOR
12V / 240V
INSTRUCTION MANUAL
SPECIFICATIONS
Mains Voltage:
12V DC &
230–240V AC ~ 50Hz
Power:
120W DC
180W AC
Max. Pressure:
8.3bar (120psi)
Max. Flow Rate:
21L/min (DC)
25L/min (AC)
S3:
25% (150s on & 450s off)
Weight:
2.3kg
ozito.com.au
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY
YOU MUST RETURN THE PRODUCT TO YOUR NEAREST
BUNNINGS WAREHOUSE WITH YOUR BUNNINGS
REGISTER RECEIPT. PRIOR TO RETURNING YOUR
PRODUCT FOR WARRANTY PLEASE TELEPHONE OUR
CUSTOMER SERVICE HELPLINE:
Australia: 1800 069 486
New Zealand: 0508 069 486
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE
THE MODEL NUMBER AND DATE OF PURCHASE
AVAILABLE. A CUSTOMER SERVICE REPRESENTATIVE
WILL TAKE YOUR CALL AND ANSWER ANY QUESTIONS
YOU MAY HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
Ozito Industries Pty. Ltd.
25 Fox Drive, Dandenong South, Victoria, Australia 3175.
DUAL POWER
120PSI
INFLATOR
PSI
BAR
KG/CM
2
WARRANTY
The benefits provided under this warranty are in addition to other rights and remedies which
are available to you at law.
Our goods come with guarantees that cannot be excluded at law. You are entitled to a
replacement or refund for a major failure and for compensation for any other reasonably
foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the
goods fail to be of acceptable quality and the failure does not amount to a major failure.
Generally you will be responsible for all costs associated with a claim under this warranty,
however, where you have suffered any additional direct loss as a result of a defective product
you may be able to claim such expenses by contacting our customer service helpline above.
3 YEAR REPLACEMENT WARRANTY*
Your product is guaranteed for a period of 36 months from the original date of purchase. If
a product is defective it will be replaced in accordance with the terms of this warranty. Warranty
excludes consumable parts, for example: valve adapters and accessories.
*This product is intended for DIY use only and replacement warranty covers domestic use.
WARNING
The following actions will result in the warranty being void.
• If the tool has been operated on a supply voltage other than that specified on the tool.
• If the tool shows signs of damage or defects caused by or resulting from abuse, accidents
or alterations.
• Failure to perform maintenance as set out within the instruction manual.
• If the tool is disassembled or tampered with in any way.
• Professional, industrial or high frequency use.
STANDARD EQUIPMENT
120PSI
DUAL POWER
INFLATOR
PSI
BAR
KG/CM
2
Dual Power Inflator
4 x Adaptors
DPI-6000
1222

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DPI-6000 and is the answer not in the manual?

Questions and answers

Summary of Contents for Ozito DPI-6000

  • Page 1 • Failure to perform maintenance as set out within the instruction manual. • If the tool is disassembled or tampered with in any way. • Professional, industrial or high frequency use. Ozito Industries Pty. Ltd. 25 Fox Drive, Dandenong South, Victoria, Australia 3175. 1222...
  • Page 2: Know Your Product

    KNOW YOUR PRODUCT SETUP & PREPARATION DUAL POWER INFLATOR 1. ASSEMBLY 1. Storage Compartment 6. LEDs 2. Current Pressure 7. Pressure Adjust Buttons 3. Light Switch 8. Target Pressure Attaching Adaptors 4. Hose Nozzle 9. Carry Handle WARNING! ENSURE THE TOOL IS TURNED OFF AND 5.
  • Page 3: Operation

    OPERATION 2. CONTROLS DUAL POWER 120PSI INFLATOR Switching On The LEDs Setting The Target Pressure 1. Press the light switch once The unit can inflate an item to a preset target pressure within the to switch on the emergency range of 3 - 120psi. Once the pressure is obtained the unit will DUAL POWER 120PSI lights.
  • Page 4: Troubleshooting

    Note: The real-time pressure DUAL POWER 120PSI INFLATOR of the connected item will be displayed on screen. WARNING! THIS INFLATOR IS FOR INTERMITTENT PERIODIC USE. ALLOW THE INFLATOR TO COOL FOR 10MINS AFTER 10MINS OF CONTINUOUS OPERATION. DPI-6000...
  • Page 5: Maintenance

    If replacement of the supply cord is necessary, this has to be done by a certified electrician in order to avoid a safety hazard. Note: Ozito Industries will not be responsible for any damage or SPARE PARTS injuries caused by the repair of the tool by an unauthorised person or by mishandling of the tool.
  • Page 6: Electrical Safety

    ELECTRICAL SAFETY WARNING! When using electric tools basic safety precautions should always be followed to reduce the residual current device reduces the risk of electric shock. risk of fire, electric shock and personal injury. • Inspect tool cords periodically and if damaged have them replaced by a certified electrician. •...

Table of Contents