Driver Installation And Operation; Driver Installation - GCC Technologies i-Craft User Manual

4. Driver Installation and Operation

The scrapbook cutter communicates with a computer through a USB
(Universal Serial Bus). This chapter shows you how to connect the
scrapbook cutter to a host computer with your familiar graphic design software
such as CorelDRAW, and Adobe Illustrator via GCC driver, and illustrate how
to set up the computer and scrapbook cutter interconnection.
Caution!!

If you are using Windows 8/ 7/ Vista/ XP/ 2000 as your operating
system, make sure you log in using the "Administrator" account.

4.1 Driver Installation

Step 1 Connect to the machine.
1. Turn on the machine.
2. Connect the USB cable to the machine, and double-click on the USB
icon on the taskbar to make sure the USB device is detected.
Step 2 Press Feed/ Eject button
47
to be ready for driver installation.