Contouring Printed Image Via Application Software; Use Sd Card With I-Craft Tm (Sd Card Is An Optional Item); Read An Sd Card In I-Craft Tm; Sd Card Settings - GCC Technologies i-Craft User Manual

4.4 Contouring Printed Image via Application Software

Please refer to section 6.3 & 6.4 for contour cutting instruction via CorelDRAW
and Adobe Illustrator AAS plug-in.
5. Use SD Card with i-Craft
TM
(SD card is an optional item)
TM
i-Craft supports SD memory card with up to 2GB and SDHC with up to 32GB
capacity and accept the types of SD cards including SD card, mini SD card
and micro SD card with adapter. Please store files in .plt format to SD card so
TM
that i-Craft can recognize the files.
5.1 Read an SD Card in i-Craft TM
TM
Insert your SD card into the slot while i-Craft is powered on, and load the
TM
media into i-Craft .

5.2 SD Card Settings

The "Origin settings", "Media", "Smooth" and "SD card" option will show on
LCD screen, press Up or Down arrow key on the control panel to move the
bullet point and press Enter key to enter settings menu.
57