GCC Technologies i-Craft User Manual page 71

Segmental Positioning
Figure A3-9
The system will create the as shown in the picture below
Segmental Positioning will be applied to Multiple Copies when the object to be
copied is of large size (with the length or width over 200mm) to increase the
accuracy of registration mark detection.
70
For precise cutting quality, it is suggested to
select "Segmental Positioning" when you are
working on an extra long or large-sized image
to increase cutting accuracy.
Segmental Positioning

X Step: The distance of intermediate position on
the X axis

Y Step: The distance of intermediate position on
the Y axis
 Range: 200mm~600mm
 Optimized Setting: Less than 500mm
Segmental Positioning
Figure A3-10