Manually Activate Software - GCC Technologies i-Craft User Manual

Step 11 Sure Cuts A Lot is ready to use.
Note

If you use a trial version to output graphics, meaning you do not enter the
software key to activate the Sure Cuts A Lot mentioned above, there will
be two extra lines cut through the design, therefore, make sure the Sure
Cuts A Lot software is activated before implementing cutting jobs.
2.3.2

Manually Activate Software

If the computer connected to i-Craft
to accomplish above software activation process, you can use "Activate
manually" function alternatively to enter the "Activation Code" to start the
usage of Sure Cuts A Lot. Meanwhile, you need to find another computer that
has internet access to obtain the "Activation Code" in advance following below
instructions.
11
TM
cutter doesn't have internet connection