Manual Activate Software - GCC Technologies AFR-24S User Manual

Note If you use a trial version to output graphics, meaning you do not enter the software
key to activate the Sure Cuts A Lot mentioned above, there will be two extra lines cut
through the design, therefore, make sure the Sure Cuts A Lot software is activated
before implementing cutting jobs.
2.7.2.2 Manually Activate Software
If the computer connected to cutter doesn't have internet connection to accomplish above
software activation process, you can use "Activate manually" function alternatively to enter
the "Activation Code" to start the usage of Sure Cuts A Lot. Meanwhile, you need to find
another computer that has internet access to obtain the "Activation Code" in advance
following below instructions.
Step 1 Check the "Activate manually" checkbox and you should see the Site Code and
Activation Code fields appear. The Site Code field will be pre-filled in and cannot be
changed.
Step 2 Visit http://www.craftedge.com/activation/surecutsalot
computer. Enter your name, serial (software key, shows on the DVD cover) and site
code.
Step 3 Click on the "Generate Activation Code" button and your activation code will be
shown in the Activation Code field.
AFR-24S User Manual
via an internet connected
51