Using The Accessories - AEG BP5304001M User Manual

12 www.aeg.com
2. Press
starts to flash.
3. Press
the hours for DURATION time.
4. Press
shows flashing
5. Press
the minutes for END time.
6. Press
Appliance turns on automatically later
on, works for the set DURATION time
and stops at the set END time. At the set
time an acoustic signal sounds for 2
minutes.
display. The appliance deactivates.
7. Press any button to stop the acoustic
signal.
8. Turn the knob for the oven functions
to the off position.
6.6 Setting the MINUTE
MINDER
1. Press

7. USING THE ACCESSORIES

WARNING!
Refer to Safety chapters.
7.1 Using the core
temperature sensor
The core temperature sensor measures
the core temperature of the meat. When
the meat is at the set temperature, the
appliance deactivates.
There are two temperatures to be set:
• The oven temperature. Refer to the
table for roasting.
• The core temperature. Refer to the
table for the core temperature sensor.
CAUTION!
Only use the core
temperature sensor supplied
with the appliance, or
genuine replacement parts.
1. Set the oven function and the oven
temperature.
again and again until
or to set the minutes and
to confirm. The display
.
or to set the hours and
to confirm.
and time setting flash in the
.
and "00" flash in the display.
2. Press or to set the MINUTE
MINDER.
First you set the seconds, then the
minutes.
When the time you set is longer than
60 minutes,
3. Set the hours.
4. The MINUTE MINDER starts
automatically after 5 seconds.
After 90% of the set time, an acoustic
signal sounds.
5. When the set time ends, an acoustic
signal sounds for 2 minutes. "00:00"
and flash in the display. Press any
button to stop the acoustic signal.
6.7 COUNT UP TIMER
To reset the Count Up Timer, press and
hold and . The timer starts to count
up again.
2. Put the point of the core temperature
sensor (with the symbol
handle) into the centre of the meat.
3. Put the plug of the core temperature
sensor into the socket on the front of
the appliance.
Make sure that the core temperature
sensor stays in the meat and in the
socket during the cooking.
When you use the core temperature
sensor for the first time, the default
core temperature is 60 °C. While
flash in the display.
on the